{"title":"Disney Display Cases","description":"\u003cp\u003eFind displays for Disney Castle editions, Disney 100 minifigures, Steamboat Willie, Lightning McQueen and Captain Jack Sparrow’s Pirate Ship. Each case listing names its LEGO set or series so you can choose the right edition and plan a coherent Disney collection.\u003c\/p\u003e\u003cp\u003eDisplay products only. LEGO® sets and models are not included.\u003c\/p\u003e","products":[{"product_id":"lego-10365-captain-jack-sparrow-s-pirate-ship-display-case","title":"Acrylic Display Case for LEGO® Captain Jack Sparrow's Pirate Ship (10365)","description":"\u003cdiv class=\"ps-product-content\" data-content-version=\"8\"\u003e\n\n\u003cp\u003eCaptain Jack Sparrow's Pirate Ship 10365 builds upward as much as outward. Its masts, sails and deck create a layered silhouette, so the display case is designed to preserve vertical clarity while giving the ship a defined presentation space.\u003c\/p\u003e\n\n\u003cp\u003eThis display product is designed specifically for LEGO® Captain Jack Sparrow's Pirate Ship set 10365. Please use the set number as the primary compatibility reference before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eDimensions \u0026amp; Specifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Width:\u003c\/strong\u003e 70 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Depth:\u003c\/strong\u003e 29 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Height:\u003c\/strong\u003e 67.3 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe display case is supplied as separate components and requires assembly. Use the supplied screws and connecting blocks to secure the corresponding parts and maintain structural stability.\u003c\/p\u003e\n\n\u003ch3\u003eAssembly Guide\u003c\/h3\u003e\n\n\u003col\u003e\n\u003cli\u003ePrepare a clean, flat and stable work surface.\u003c\/li\u003e\n\u003cli\u003eAlign the acrylic panels and structural components according to the supplied instructions.\u003c\/li\u003e\n\u003cli\u003eUse the supplied screws and connecting blocks to secure the required sections.\u003c\/li\u003e\n\u003cli\u003eCheck that all connections are properly tightened and the empty enclosure is stable.\u003c\/li\u003e\n\u003cli\u003ePlace the completed LEGO® Pirate Ship inside only after the case has been fully assembled.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eTake extra care when positioning the model, especially around the projecting masts, spars and sails. Keep the completed ship away from the assembly area until the enclosure is ready.\u003c\/p\u003e\n\n\u003ch3\u003eImportant Notes Before You Buy\u003c\/h3\u003e\n\n\u003ch4\u003eIs this case intended for the complete LEGO® 10365 ship?\u003c\/h4\u003e\n\u003cp\u003eYes. Compatibility is specifically for LEGO® Captain Jack Sparrow's Pirate Ship set 10365. Please confirm the set number before ordering rather than relying only on the general pirate-ship description.\u003c\/p\u003e\n\n\u003ch4\u003eClear or printed background: which should I choose?\u003c\/h4\u003e\n\u003cp\u003eThe clear version works well when the ship is displayed as part of a larger Disney or maritime collection. A printed background creates a stronger visual horizon behind the masts and can help the ship stand out from a patterned or visually busy wall.\u003c\/p\u003e\n\n\u003cp\u003ePrinted artwork is included only with the corresponding printed-background option.\u003c\/p\u003e\n\n\u003ch4\u003eWhat is included?\u003c\/h4\u003e\n\u003cp\u003eThe package includes the acrylic enclosure panels, display base, required connectors and assembly instructions. An electronic copy of the instructions can also be sent to the email address you specify.\u003c\/p\u003e\n\n\u003cp\u003eLEGO® set 10365, the completed ship, characters and any scene elements shown in product images are not included.\u003c\/p\u003e\n\n\u003ch4\u003eWhat requires extra care during setup?\u003c\/h4\u003e\n\u003cp\u003eAssemble the empty enclosure first and confirm that it is stable. Move the completed ship only after the case is ready, paying close attention to the masts, spars, sails and other projecting elements.\u003c\/p\u003e\n\n\u003ch3\u003eReturn Policy\u003c\/h3\u003e\n\u003cp\u003eContact \u003ca href=\"mailto:info@cubebuff.com\"\u003einfo@cubebuff.com\u003c\/a\u003e within 30 days of delivery with your order number and photo or video evidence. Eligible requests receive return authorization within 48 hours. Wait for approval and the correct return address before shipping anything back.\u003c\/p\u003e\n\u003cp\u003eChange-of-mind returns require unused, complete goods in original condition. Custom-made, engraved or personalized products and items marked “Final Sale” are excluded. Use original or protective packaging; tracked shipping is recommended. Customers pay non-defective return shipping; outbound and return shipping costs are non-refundable unless defective.\u003c\/p\u003e\n\u003cp\u003eRequest cancellation within 24 hours of ordering. Personal-reason cancellations before shipment carry a fee of 10% of the order amount; custom-product exclusions apply.\u003c\/p\u003e\n\u003cp\u003eApproved original-payment refunds take 3–5 business days, with an additional 2–3 days possible for international orders. Store credit is issued immediately with a 5% bonus. EU consumers have a 14-calendar-day withdrawal window for unused eligible goods. See the \u003ca href=\"\/policies\/refund-policy\"\u003eReturns \u0026amp; Refunds Policy\u003c\/a\u003e for full and partial refund conditions, exclusions and mandatory rights.\u003c\/p\u003e\n\n\u003ch3\u003eEstimated Delivery\u003c\/h3\u003e\n\u003cp\u003eStandard preparation takes 1–3 business days; identified special or oversized products take 5–7 days, and custom-made products take 5–15 business days. Pre-orders follow the product-page dispatch date.\u003c\/p\u003e\n\u003cp\u003eAfter dispatch, standard delivery is estimated at 7–14 business days and expedited delivery at 3–7 business days when offered at checkout. Shipping charges and availability depend on the destination and are calculated at checkout. Estimates are not guaranteed.\u003c\/p\u003e\n\u003cp\u003eTracking is emailed when the order ships. Contact \u003ca href=\"mailto:info@cubebuff.com\"\u003einfo@cubebuff.com\u003c\/a\u003e if the parcel is more than 10 business days past the estimated delivery date. See the \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003ch4\u003eWhat viewing height suits a tall sailing ship?\u003c\/h4\u003e\n\u003cp\u003ePlace the case where the deck remains visible while the mast tops are not obstructed by the shelf above. A mid-level display position usually provides a clearer view of the rigging, sails and hull.\u003c\/p\u003e\n\n\u003ch4\u003eWhich parts of the display should remain visually clear?\u003c\/h4\u003e\n\u003cp\u003eKeep the bow, mast line and outer sail edges free from surrounding clutter. Avoid placing tall decorative objects immediately beside the case, as they can compete with the ship's vertical silhouette.\u003c\/p\u003e\n\n\u003ch4\u003eHow much space should I reserve?\u003c\/h4\u003e\n\u003cp\u003ePlease confirm the external dimensions of 70 cm × 29 cm × 67.3 cm and allow additional clearance around the case for assembly, placement and access.\u003c\/p\u003e\n\n\u003ch4\u003eIs LEGO® set 10365 included?\u003c\/h4\u003e\n\u003cp\u003eNo. This purchase is for the display product only. LEGO® set 10365 and the completed model are not included.\u003c\/p\u003e\n\n\u003ch4\u003eTrademark Notice\u003c\/h4\u003e\n\u003cp\u003eLEGO® is a trademark of the LEGO Group, which does not sponsor, authorize or endorse this independently made display product.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"CubeBuff","offers":[{"title":"Clear","offer_id":56017774936386,"sku":"PS-DC-10365-STD","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Printed Background","offer_id":56017774969154,"sku":"PS-DC-10365-PREM","price":155.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/01_idisplayit-com_01_7b6c85f6-7c70-4292-a823-a870c2555313.webp?v=1787997384"},{"product_id":"lego-43222-disney-castle-display-case","title":"Acrylic Display Case for LEGO® Disney Castle (43222)","description":"\u003cdiv class=\"ps-product-content\" data-content-version=\"8\"\u003e\n\n\u003cp\u003e\u003cstrong\u003eA castle under the fireworks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTurn your LEGO® Disney Castle set 43222 into a dramatic nighttime centerpiece with this CubeBuff gem-shaped acrylic display case. A colorful fireworks backdrop, faceted clear panels, decorative scrollwork and integrated lighting create a fairy-tale setting around the castle while helping protect the completed model from dust and everyday contact.\u003c\/p\u003e\n\n\u003cp\u003eThis display case is designed specifically for LEGO® Disney Castle set 43222. The LEGO® set and completed castle are not included.\u003c\/p\u003e\n\n\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\n\n\u003ch4\u003eGem-Shaped Acrylic Enclosure\u003c\/h4\u003e\n\u003cp\u003eThe case uses a faceted gem-inspired profile rather than a conventional rectangular enclosure. The angled clear panels create a more architectural presentation around the castle while preserving visibility from multiple viewing angles.\u003c\/p\u003e\n\n\u003ch4\u003eOrnate Carved Panel Details\u003c\/h4\u003e\n\u003cp\u003eDecorative vintage-style scrollwork is incorporated into the clear panels, giving the enclosure a more elaborate palace-inspired appearance that complements the fantasy architecture of the Disney Castle.\u003c\/p\u003e\n\n\u003ch4\u003eFireworks Night-Sky Backdrop\u003c\/h4\u003e\n\u003cp\u003eA colorful fireworks scene is UV-printed directly onto the rear panel, creating the appearance of the castle standing beneath a nighttime celebration.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eUV printing refers to the artwork printing process and does not mean the panel has a UV-protective coating.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch4\u003eIlluminated Base with Four Spotlights\u003c\/h4\u003e\n\u003cp\u003eThe display includes a built-in illuminated base and four upward-facing spotlights positioned around the castle. Together, they highlight the towers, facade and architectural details from below for a stronger evening display effect.\u003c\/p\u003e\n\n\u003ch4\u003eUSB Powered\u003c\/h4\u003e\n\u003cp\u003eThe lighting system operates through a single USB connection. A compatible USB cable is included with the display case.\u003c\/p\u003e\n\n\u003ch3\u003eDimensions \u0026amp; Specifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible LEGO® Set:\u003c\/strong\u003e 43222 Disney Castle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 66 × 86 × 43 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 25.98 × 33.86 × 16.93 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay Style:\u003c\/strong\u003e Freestanding tabletop display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Gem-shaped faceted acrylic enclosure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Clear acrylic with UV-printed background panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e Illuminated base with 4 spotlights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e USB powered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Screw-joined panels and accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEstimated Assembly Time:\u003c\/strong\u003e Approximately 30 minutes for one person\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMaterials \u0026amp; Finish\u003c\/h3\u003e\n\n\u003ch4\u003eClear Acrylic Panels\u003c\/h4\u003e\n\u003cp\u003eHigh-clarity acrylic panels keep the castle visible while creating a fully enclosed barrier that helps reduce dust exposure.\u003c\/p\u003e\n\n\u003ch4\u003eDecorative Carved Panels\u003c\/h4\u003e\n\u003cp\u003eSelected clear panels feature ornate carved scrollwork that adds visual detail without covering the main castle viewing area.\u003c\/p\u003e\n\n\u003ch4\u003ePrinted Rear Panel\u003c\/h4\u003e\n\u003cp\u003eThe rear panel features a high-resolution UV-printed fireworks night-sky design created specifically to complement the Disney Castle display.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Structure Guide\u003c\/h3\u003e\n\n\u003ch4\u003e1. Identify the Protective Film\u003c\/h4\u003e\n\u003cp\u003eBefore assembly, inspect each acrylic component carefully.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eTransparent acrylic panels have protective film on both sides.\u003c\/li\u003e\n\u003cli\u003eUV-printed panels have protective film on one side.\u003c\/li\u003e\n\u003cli\u003eCarved decorative panels do not use protective film and are supplied separately bagged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003e2. Remove the Protective Film\u003c\/h4\u003e\n\u003cp\u003eCarefully peel away the protective film from the applicable acrylic surfaces before final assembly. Avoid using sharp metal tools that could scratch the panels.\u003c\/p\u003e\n\n\u003ch4\u003e3. Assemble the Acrylic Structure\u003c\/h4\u003e\n\u003cp\u003eAlign the faceted acrylic panels according to the supplied instructions and secure the required sections using the included screws and accessories.\u003c\/p\u003e\n\n\u003ch4\u003e4. Install the Backdrop\u003c\/h4\u003e\n\u003cp\u003ePosition the UV-printed fireworks panel at the rear of the enclosure, making sure the printed artwork faces the intended viewing direction.\u003c\/p\u003e\n\n\u003ch4\u003e5. Install the Lighting Components\u003c\/h4\u003e\n\u003cp\u003eFit the illuminated base and four spotlights in their designated positions. Route the lighting cable neatly toward the USB power connection.\u003c\/p\u003e\n\n\u003ch4\u003e6. Position the Disney Castle\u003c\/h4\u003e\n\u003cp\u003ePlace the completed LEGO® Disney Castle carefully onto the display base. Center the model and check that the tallest towers and projecting decorative elements remain clear of the acrylic panels.\u003c\/p\u003e\n\n\u003ch4\u003e7. Complete the Enclosure\u003c\/h4\u003e\n\u003cp\u003eInstall the remaining acrylic components and check that all screws, panels and accessories are correctly seated before powering the lighting system.\u003c\/p\u003e\n\n\u003ch4\u003eAssembly Notes\u003c\/h4\u003e\n\n\u003cul\u003e\n\u003cli\u003eThe display case is supplied as a parts kit and requires assembly.\u003c\/li\u003e\n\u003cli\u003eApproximate assembly time is 30 minutes for one person.\u003c\/li\u003e\n\u003cli\u003eDo not overtighten screws against acrylic components.\u003c\/li\u003e\n\u003cli\u003eAssemble the product on a clean, flat and stable surface.\u003c\/li\u003e\n\u003cli\u003eHandle large acrylic panels by their edges where possible.\u003c\/li\u003e\n\u003cli\u003eBecause of the overall size, additional assistance may be useful when moving the completed display.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eLighting System\u003c\/h3\u003e\n\n\u003cp\u003eThe integrated lighting system is designed to turn the Disney Castle into a stronger nighttime focal point rather than simply illuminating the enclosure.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eBuilt-in illuminated display base.\u003c\/li\u003e\n\u003cli\u003eFour upward-facing spotlights.\u003c\/li\u003e\n\u003cli\u003eSingle USB power connection.\u003c\/li\u003e\n\u003cli\u003eUSB cable included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eA USB power adapter is not listed as part of the package unless specifically shown or stated in the selected product configuration.\u003c\/p\u003e\n\n\u003ch3\u003eWhat Is Included\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e1 × CubeBuff acrylic display case\u003c\/li\u003e\n\u003cli\u003e1 × illuminated display base\u003c\/li\u003e\n\u003cli\u003e4 × spotlights\u003c\/li\u003e\n\u003cli\u003e1 × UV-printed fireworks backdrop\u003c\/li\u003e\n\u003cli\u003e1 × USB cable\u003c\/li\u003e\n\u003cli\u003eRequired screws and assembly accessories\u003c\/li\u003e\n\u003cli\u003eAssembly instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eLEGO® Disney Castle set 43222, the completed castle, minifigures and other LEGO® elements shown in product images are not included.\u003c\/p\u003e\n\n\u003ch3\u003eImportant Notes Before You Buy\u003c\/h3\u003e\n\n\u003ch4\u003eIs this case designed specifically for LEGO® set 43222?\u003c\/h4\u003e\n\u003cp\u003eYes. This display case is designed for LEGO® Disney Castle set 43222. The earlier LEGO® Disney Castle set 71040 has different dimensions and should not be assumed to fit this enclosure.\u003c\/p\u003e\n\n\u003ch4\u003eIs this a standard rectangular acrylic case?\u003c\/h4\u003e\n\u003cp\u003eNo. This version uses a distinctive gem-shaped faceted enclosure with decorative carved details, a printed fireworks backdrop and integrated lighting.\u003c\/p\u003e\n\n\u003ch4\u003eDoes the fireworks background light up?\u003c\/h4\u003e\n\u003cp\u003eThe fireworks scene itself is UV-printed artwork. The display lighting comes from the illuminated base and four spotlights.\u003c\/p\u003e\n\n\u003ch4\u003eDoes UV-printed mean UV protected?\u003c\/h4\u003e\n\u003cp\u003eNo. “UV-printed” describes the printing method used for the artwork. It does not indicate that the acrylic or printed panel provides UV-protective filtering.\u003c\/p\u003e\n\n\u003ch4\u003eIs this a wall-mounted display?\u003c\/h4\u003e\n\u003cp\u003eNo. This product is designed as a freestanding tabletop display case. Place it on a stable, level surface capable of supporting the complete display.\u003c\/p\u003e\n\n\u003ch3\u003eCare \u0026amp; Placement\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eClean acrylic surfaces with a soft, dry or suitable microfiber cloth.\u003c\/li\u003e\n\u003cli\u003eAvoid abrasive cleaners or rough materials that may scratch the acrylic.\u003c\/li\u003e\n\u003cli\u003eKeep the display away from direct sunlight where possible.\u003c\/li\u003e\n\u003cli\u003ePlace the case on a stable, level tabletop, cabinet or display plinth.\u003c\/li\u003e\n\u003cli\u003eAllow sufficient clearance around the 66 × 86 × 43 cm enclosure for installation, cleaning and access.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eReturn Policy\u003c\/h3\u003e\n\u003cp\u003eContact \u003ca href=\"mailto:info@cubebuff.com\"\u003einfo@cubebuff.com\u003c\/a\u003e within 30 days of delivery with your order number and photo or video evidence. Eligible requests receive return authorization within 48 hours. Wait for approval and the correct return address before shipping anything back.\u003c\/p\u003e\n\u003cp\u003eChange-of-mind returns require unused, complete goods in original condition. Custom-made, engraved or personalized products and items marked “Final Sale” are excluded. Use original or protective packaging; tracked shipping is recommended. Customers pay non-defective return shipping; outbound and return shipping costs are non-refundable unless defective.\u003c\/p\u003e\n\u003cp\u003eRequest cancellation within 24 hours of ordering. Personal-reason cancellations before shipment carry a fee of 10% of the order amount; custom-product exclusions apply.\u003c\/p\u003e\n\u003cp\u003eApproved original-payment refunds take 3–5 business days, with an additional 2–3 days possible for international orders. Store credit is issued immediately with a 5% bonus. EU consumers have a 14-calendar-day withdrawal window for unused eligible goods. See the \u003ca href=\"\/policies\/refund-policy\"\u003eReturns \u0026amp; Refunds Policy\u003c\/a\u003e for full and partial refund conditions, exclusions and mandatory rights.\u003c\/p\u003e\n\n\u003ch3\u003eEstimated Delivery\u003c\/h3\u003e\n\u003cp\u003eStandard preparation takes 1–3 business days; identified special or oversized products take 5–7 days, and custom-made products take 5–15 business days. Pre-orders follow the product-page dispatch date.\u003c\/p\u003e\n\u003cp\u003eAfter dispatch, standard delivery is estimated at 7–14 business days and expedited delivery at 3–7 business days when offered at checkout. Shipping charges and availability depend on the destination and are calculated at checkout. Estimates are not guaranteed.\u003c\/p\u003e\n\u003cp\u003eTracking is emailed when the order ships. Contact \u003ca href=\"mailto:info@cubebuff.com\"\u003einfo@cubebuff.com\u003c\/a\u003e if the parcel is more than 10 business days past the estimated delivery date. See the \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003ch4\u003eHow much space should I reserve?\u003c\/h4\u003e\n\u003cp\u003ePlease allow at least 66 × 86 × 43 cm for the display itself, plus additional clearance for assembly, cable routing and cleaning.\u003c\/p\u003e\n\n\u003ch4\u003eCan I use the display without turning on the lights?\u003c\/h4\u003e\n\u003cp\u003eYes. The acrylic enclosure, carved details and printed fireworks background can still be used as a complete display presentation without powering the lighting system.\u003c\/p\u003e\n\n\u003ch4\u003eIs a USB cable included?\u003c\/h4\u003e\n\u003cp\u003eYes. A USB cable is included for powering the integrated lighting system.\u003c\/p\u003e\n\n\u003ch4\u003eDoes the display arrive assembled?\u003c\/h4\u003e\n\u003cp\u003eNo. The enclosure is supplied as separate panels and accessories and requires assembly.\u003c\/p\u003e\n\n\u003ch4\u003eIs LEGO® set 43222 included?\u003c\/h4\u003e\n\u003cp\u003eNo. This purchase is for the CubeBuff display case only. LEGO® Disney Castle set 43222 and the completed model are not included.\u003c\/p\u003e\n\n\u003ch4\u003eTrademark Notice\u003c\/h4\u003e\n\n\u003cp\u003eLEGO® is a trademark of the LEGO Group, which does not sponsor, authorize or endorse this independently made display product.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"CubeBuff","offers":[{"title":"Printed Background","offer_id":56017775755586,"sku":"PS-DC-43222-PREM","price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/016_01_20afd9d6bde2.webp?v=1791031427"},{"product_id":"lego-71040-disney-castle-display-case","title":"Acrylic Display Case for LEGO® Disney Castle (71040)","description":"\u003cdiv class=\"ps-product-content\" data-content-version=\"8\"\u003e\n\n\u003cp\u003eGive your LEGO® Disney Castle set 71040 a dedicated freestanding display with a tall, fully enclosed acrylic case. The enclosure creates a clean visual boundary around the castle so the central tower, irregular fantasy skyline and smaller architectural details remain easy to appreciate while helping protect the completed model from dust and everyday contact.\u003c\/p\u003e\n\n\u003cp\u003eThis display product is designed specifically for LEGO® Disney Castle set 71040. Please use the set number as the primary compatibility reference before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eDimensions \u0026amp; Specifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Width:\u003c\/strong\u003e 57 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Depth:\u003c\/strong\u003e 37 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Height:\u003c\/strong\u003e 80.3 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible LEGO® Set:\u003c\/strong\u003e 71040\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eDisplay Case Type\u003c\/h4\u003e\n\u003cp\u003eLarge freestanding acrylic dust-protection display case designed for tabletop, shelf, cabinet or display plinth use.\u003c\/p\u003e\n\n\u003ch4\u003eDisplay Space\u003c\/h4\u003e\n\u003cp\u003eThe enclosure is sized specifically for LEGO® Disney Castle set 71040, providing clearance around the central tower, outer sections and projecting decorative details while maintaining a balanced overall presentation.\u003c\/p\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Assembly\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eSupplied as a flat-packed parts kit and requires assembly.\u003c\/li\u003e\n\u003cli\u003eMain components use slot-and-tab connections for positioning and alignment.\u003c\/li\u003e\n\u003cli\u003eSupplied screws and connecting blocks are used to secure the required structural sections.\u003c\/li\u003e\n\u003cli\u003eSome configurations may require a small number of additional screws to be tightened.\u003c\/li\u003e\n\u003cli\u003eThe transparent enclosure can be lifted vertically away from the base for easier access to the model.\u003c\/li\u003e\n\u003cli\u003eTo reinstall the enclosure, lower it carefully into the corresponding locating groove in the base.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Structure Guide\u003c\/h3\u003e\n\n\u003ch4\u003e1. Prepare the Components\u003c\/h4\u003e\n\u003cp\u003eUnpack the acrylic panels, base, connecting blocks, screws and other supplied components on a clean, flat and stable work surface.\u003c\/p\u003e\n\n\u003ch4\u003e2. Assemble the Enclosure\u003c\/h4\u003e\n\u003cp\u003eAlign the panels using the corresponding slot-and-tab connection points. Fit the supplied connecting blocks and screws to the sections that require additional fastening.\u003c\/p\u003e\n\n\u003ch4\u003e3. Inspect the Empty Case\u003c\/h4\u003e\n\u003cp\u003eBefore placing the castle inside, check that all panels are correctly aligned, the required screws are secure and the enclosure sits evenly on the display base.\u003c\/p\u003e\n\n\u003ch4\u003e4. Position the Disney Castle\u003c\/h4\u003e\n\u003cp\u003ePlace the completed LEGO® Disney Castle carefully in the center of the base. Make sure the tallest spires, outer towers and projecting decorative elements remain clear of the surrounding panels.\u003c\/p\u003e\n\n\u003ch4\u003e5. Install the Transparent Enclosure\u003c\/h4\u003e\n\u003cp\u003eLift the assembled transparent enclosure above the model and lower it vertically into the locating groove in the base. Make sure the enclosure is fully seated and stable before releasing it.\u003c\/p\u003e\n\n\u003ch4\u003eAssembly Notes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBecause of the 80.3 cm overall height, two-person handling is recommended when lifting or repositioning the assembled enclosure.\u003c\/li\u003e\n\u003cli\u003eSupport the enclosure from stable lower sections rather than lifting it by the top panel alone.\u003c\/li\u003e\n\u003cli\u003eDo not overtighten screws against acrylic components.\u003c\/li\u003e\n\u003cli\u003eDo not force panels or connectors into position. Recheck alignment first.\u003c\/li\u003e\n\u003cli\u003ePlace the completed display on a stable, level surface capable of supporting the full assembled display.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant Notes Before You Buy\u003c\/h3\u003e\n\n\u003ch4\u003eIs this case designed for LEGO® Disney Castle set 71040?\u003c\/h4\u003e\n\u003cp\u003eYes. This display case is designed specifically for LEGO® Disney Castle set 71040.\u003c\/p\u003e\n\n\u003ch4\u003eIs this the same case as the LEGO® 43222 Disney Castle version?\u003c\/h4\u003e\n\u003cp\u003eNo. LEGO® Disney Castle set 43222 is a different release with different dimensions. Please confirm set number 71040 before ordering this display case.\u003c\/p\u003e\n\n\u003ch4\u003eWhat is included?\u003c\/h4\u003e\n\u003cp\u003eThe package includes the display case panels, display base, connecting blocks, required screws and assembly instructions.\u003c\/p\u003e\n\n\u003cp\u003eLEGO® set 71040, the completed Disney Castle, minifigures and decorative LEGO® elements shown in product images are not included.\u003c\/p\u003e\n\n\u003ch4\u003eCan the transparent enclosure be removed after assembly?\u003c\/h4\u003e\n\u003cp\u003eYes. The transparent enclosure can be lifted vertically from the display base whenever access to the model is required. Reinstall it by carefully lowering it back into the corresponding base groove.\u003c\/p\u003e\n\n\u003ch4\u003eWhat should I check before placing the castle inside?\u003c\/h4\u003e\n\u003cp\u003eAssemble and inspect the empty case first. Confirm that all connections are secure and that the enclosure sits correctly on the base before moving the completed castle into position.\u003c\/p\u003e\n\n\u003ch3\u003eReturn Policy\u003c\/h3\u003e\n\u003cp\u003eContact \u003ca href=\"mailto:info@cubebuff.com\"\u003einfo@cubebuff.com\u003c\/a\u003e within 30 days of delivery with your order number and photo or video evidence. Eligible requests receive return authorization within 48 hours. Wait for approval and the correct return address before shipping anything back.\u003c\/p\u003e\n\u003cp\u003eChange-of-mind returns require unused, complete goods in original condition. Custom-made, engraved or personalized products and items marked “Final Sale” are excluded. Use original or protective packaging; tracked shipping is recommended. Customers pay non-defective return shipping; outbound and return shipping costs are non-refundable unless defective.\u003c\/p\u003e\n\u003cp\u003eRequest cancellation within 24 hours of ordering. Personal-reason cancellations before shipment carry a fee of 10% of the order amount; custom-product exclusions apply.\u003c\/p\u003e\n\u003cp\u003eApproved original-payment refunds take 3–5 business days, with an additional 2–3 days possible for international orders. Store credit is issued immediately with a 5% bonus. EU consumers have a 14-calendar-day withdrawal window for unused eligible goods. See the \u003ca href=\"\/policies\/refund-policy\"\u003eReturns \u0026amp; Refunds Policy\u003c\/a\u003e for full and partial refund conditions, exclusions and mandatory rights.\u003c\/p\u003e\n\n\u003ch3\u003eEstimated Delivery\u003c\/h3\u003e\n\u003cp\u003eStandard preparation takes 1–3 business days; identified special or oversized products take 5–7 days, and custom-made products take 5–15 business days. Pre-orders follow the product-page dispatch date.\u003c\/p\u003e\n\u003cp\u003eAfter dispatch, standard delivery is estimated at 7–14 business days and expedited delivery at 3–7 business days when offered at checkout. Shipping charges and availability depend on the destination and are calculated at checkout. Estimates are not guaranteed.\u003c\/p\u003e\n\u003cp\u003eTracking is emailed when the order ships. Contact \u003ca href=\"mailto:info@cubebuff.com\"\u003einfo@cubebuff.com\u003c\/a\u003e if the parcel is more than 10 business days past the estimated delivery date. See the \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003ch4\u003eHow much space should I reserve for the display?\u003c\/h4\u003e\n\u003cp\u003ePlease allow at least 57 cm × 37 cm × 80.3 cm for the case itself, with additional clearance above and around the enclosure for cover removal, installation and cleaning.\u003c\/p\u003e\n\n\u003ch4\u003eWhere should I place such a tall display case?\u003c\/h4\u003e\n\u003cp\u003eUse a stable, level surface where both the lower castle scenes and the highest tower can be viewed comfortably. Avoid placing the case beneath low shelves or in areas where it could be accidentally struck.\u003c\/p\u003e\n\n\u003ch4\u003eCan I remove the enclosure to adjust the model?\u003c\/h4\u003e\n\u003cp\u003eYes. Lift the transparent enclosure vertically from the base, make the required adjustments, then lower it carefully back into the locating groove.\u003c\/p\u003e\n\n\u003ch4\u003eDoes the case arrive assembled?\u003c\/h4\u003e\n\u003cp\u003eNo. The display case is supplied as individual components and requires assembly.\u003c\/p\u003e\n\n\u003ch4\u003eIs this a wall-mounted display?\u003c\/h4\u003e\n\u003cp\u003eNo. This product is a freestanding acrylic display case designed for tabletop, shelf, cabinet or display plinth use.\u003c\/p\u003e\n\n\u003ch4\u003eIs LEGO® set 71040 included?\u003c\/h4\u003e\n\u003cp\u003eNo. This purchase is for the display product only. LEGO® set 71040 and the completed Disney Castle are not included.\u003c\/p\u003e\n\n\u003ch4\u003eTrademark Notice\u003c\/h4\u003e\n\u003cp\u003eLEGO® is a trademark of the LEGO Group, which does not sponsor, authorize or endorse this independently made display product.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"CubeBuff","offers":[{"title":"Clear","offer_id":56017778999618,"sku":"PS-DC-71040-STD","price":245.0,"currency_code":"USD","in_stock":true},{"title":"Printed Background","offer_id":56017779032386,"sku":"PS-DC-71040-PREM","price":276.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/01_idisplayit-com_01_1e94a983-ae4b-4ea8-a783-d563ce80989e.webp?v=1787998245"},{"product_id":"lego-77255-lightning-mcqueen-display-case","title":"Acrylic Display Case for LEGO® Lightning McQueen (77255)","description":"\u003cdiv class=\"ps-product-content\" data-content-version=\"7\"\u003e\n\u003cdetails class=\"ps-product-detail ps-product-detail--overview\"\u003e\u003csummary\u003eProduct description\u003c\/summary\u003e\u003cdiv class=\"ps-product-detail__body\"\u003e\n\u003cp\u003eLightning McQueen 77255 is small in scale but instantly recognizable through its red body, eyes and racing graphics. The case gives the character car enough visual space to feel like a collectible rather than a loose vehicle left between larger builds.\u003c\/p\u003e\n\u003cp\u003eThis display product is made for LEGO® set 77255. Use the set number as the primary compatibility check before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails class=\"ps-product-detail\"\u003e\u003csummary\u003eImportant notes before you buy\u003c\/summary\u003e\u003cdiv class=\"ps-product-detail__body\"\u003e\n\u003ch3\u003eIs this case matched to set 77255?\u003c\/h3\u003e\n\u003cp\u003eYes. Use LEGO® set number 77255 as the compatibility check. Other Lightning McQueen models and scales should not be assumed to fit.\u003c\/p\u003e\n\u003ch3\u003eWhich background fits a Cars collection?\u003c\/h3\u003e\n\u003cp\u003eClear keeps neighboring characters and vehicles visible and supports a larger racing lineup. Printed Background makes Lightning McQueen a standalone scene and helps a small model hold attention on a busy shelf.\u003c\/p\u003e\n\u003ch3\u003eWhat case parts are supplied for Lightning McQueen?\u003c\/h3\u003e\n\u003cp\u003eThe display product contains acrylic panels, a base, connectors and printed assembly instructions. An electronic copy can also be sent to the email address you specify. LEGO® set 77255 and the Lightning McQueen model are not included.\u003c\/p\u003e\n\u003ch3\u003eWhat should be done before final placement?\u003c\/h3\u003e\n\u003cp\u003eAssemble and inspect the empty case, confirm the chosen viewing angle, then support the car from underneath when moving it into the display.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails class=\"ps-product-detail\"\u003e\u003csummary\u003eReturn policy\u003c\/summary\u003e\u003cdiv class=\"ps-product-detail__body\"\u003e\n\u003cp\u003eContact \u003ca href=\"mailto:info@cubebuff.com\"\u003einfo@cubebuff.com\u003c\/a\u003e within 30 days of delivery with your order number and photo or video evidence. Eligible requests receive return authorization within 48 hours. Wait for approval and the correct return address before shipping anything back.\u003c\/p\u003e\n\u003cp\u003eChange-of-mind returns require unused, complete goods in original condition. Custom-made, engraved or personalized products and items marked “Final Sale” are excluded. Use original or protective packaging; tracked shipping is recommended. Customers pay non-defective return shipping; outbound and return shipping costs are non-refundable unless defective.\u003c\/p\u003e\n\u003cp\u003eRequest cancellation within 24 hours of ordering. Personal-reason cancellations before shipment carry a fee of 10% of the order amount; custom-product exclusions apply.\u003c\/p\u003e\n\u003cp\u003eApproved original-payment refunds take 3–5 business days, with an additional 2–3 days possible for international orders. Store credit is issued immediately with a 5% bonus. EU consumers have a 14-calendar-day withdrawal window for unused eligible goods. See the \u003ca href=\"\/policies\/refund-policy\"\u003eReturns \u0026amp; Refunds Policy\u003c\/a\u003e for full and partial refund conditions, exclusions and mandatory rights.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails class=\"ps-product-detail\"\u003e\u003csummary\u003eEstimated delivery\u003c\/summary\u003e\u003cdiv class=\"ps-product-detail__body\"\u003e\n\u003cp\u003eStandard preparation takes 1–3 business days; identified special or oversized products take 5–7 days, and custom-made products take 5–15 business days. Pre-orders follow the product-page dispatch date.\u003c\/p\u003e\n\u003cp\u003eAfter dispatch, standard delivery is estimated at 7–14 business days and expedited delivery at 3–7 business days when offered at checkout. Shipping charges and availability depend on the destination and are calculated at checkout. Estimates are not guaranteed.\u003c\/p\u003e\n\u003cp\u003eTracking is emailed when the order ships. Contact \u003ca href=\"mailto:info@cubebuff.com\"\u003einfo@cubebuff.com\u003c\/a\u003e if the parcel is more than 10 business days past the estimated delivery date. See the \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for details.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails class=\"ps-product-detail\"\u003e\u003csummary\u003eFrequently asked questions\u003c\/summary\u003e\u003cdiv class=\"ps-product-detail__body\"\u003e\n\u003ch3\u003eWhat angle keeps both car and character visible?\u003c\/h3\u003e\n\u003cp\u003eUse a front three-quarter view so the eyes, smile area, side graphics and racing stance can be understood together. A straight side view may lose much of the character expression.\u003c\/p\u003e\n\u003ch3\u003eHow much space does a compact case need visually?\u003c\/h3\u003e\n\u003cp\u003eDo not pack larger vehicles directly against it. A modest open margin around the enclosure allows the smaller subject to remain readable and prevents scale differences from overwhelming it.\u003c\/p\u003e\n\u003ch3\u003eProduct scope and trademark note for set 77255\u003c\/h3\u003e\n\u003cp\u003eThis purchase is for the display product only; LEGO® set 77255 and the completed model are not included. LEGO® is a trademark of the LEGO Group, which does not sponsor, authorize or endorse this independently made display product.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e","brand":"CubeBuff","offers":[{"title":"Clear","offer_id":56017782833474,"sku":"PS-DC-77255-STD","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Printed Background","offer_id":56017782866242,"sku":"PS-DC-77255-PREM","price":57.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/01_brickcessories-com_01_ef83b209-c34a-4a71-9264-02db1a499326.webp?v=1787998509"},{"product_id":"lego-40478-mini-disney-castle-display-case","title":"Acrylic Display Case for LEGO Mini Disney Castle (40478)","description":"\u003cp\u003ePut the Mini Disney Castle in front of its own fireworks display. This acrylic case for LEGO 40478 combines a blue printed background, clear panels and a black base for the castle and its minifigure.\u003c\/p\u003e\u003ch2\u003eDisplay details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe blue fireworks background frames the castle spires without taking extra shelf space.\u003c\/li\u003e\n\u003cli\u003eA 20 x 19 cm external footprint suits a compact castle display.\u003c\/li\u003e\n\u003cli\u003eThe clear cover lifts off so you can reach the model and minifigure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned for LEGO 40478 Mini Disney Castle. Match the exact set number on your box or instruction booklet before ordering.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDimensions (external): Width: 20cm, Depth: 19cm, Height: 23.3cm\u003c\/p\u003e\u003cp\u003eAllow additional space above the case to lift off the cover and around it for placement.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3 mm clear acrylic case panels.\u003c\/li\u003e\n\u003cli\u003eBlack acrylic display base.\u003c\/li\u003e\n\u003cli\u003eScrews and connector cubes for assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChoose your configuration\u003c\/h2\u003e\u003cp\u003eThis listing includes the Blue Fireworks Background shown in the main product image. Models and other collectibles pictured alongside the case are display examples.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClear 3 mm acrylic case panels.\u003c\/li\u003e\n\u003cli\u003eBlack acrylic display base.\u003c\/li\u003e\n\u003cli\u003eAssembly screws and connector cubes.\u003c\/li\u003e\n\u003cli\u003eBlue fireworks printed background.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e\u003cp\u003eAssembly is required. Join the acrylic panels using the screws and connector cubes. The clear cover lifts off the base for access and sits back in the base grooves.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eShipping charges and available services are calculated at checkout for your destination. Standard transit is estimated at 7–14 business days after dispatch; preparation time is additional. See the \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for standard, special, custom and pre-order schedules.\u003c\/p\u003e\n\u003cp\u003eContact \u003ca href=\"mailto:info@cubebuff.com\"\u003einfo@cubebuff.com\u003c\/a\u003e within 30 days of delivery before returning anything. Eligible requests receive authorization within 48 hours. Custom-made, engraved or personalized products and items marked “Final Sale” are excluded from change-of-mind returns. See the \u003ca href=\"\/policies\/refund-policy\"\u003eReturns \u0026amp; Refunds Policy\u003c\/a\u003e for cancellation fees, return costs, refunds and EU withdrawal rights.\u003c\/p\u003e\u003ch2\u003eExplore more displays\u003c\/h2\u003e\u003cp\u003eBrowse \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-cases\"\u003eLEGO display cases\u003c\/a\u003e and choose by the exact LEGO set number for your next display.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Blue Fireworks Background","offer_id":56170981785922,"sku":null,"price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb-lego-40478-mini-disney-castle-display-case-01-hero-20260915.webp?v=1789433489"},{"product_id":"lego-71038-disney-100-minifigures-display-case","title":"Acrylic Display Case for LEGO Disney 100 Minifigures (71038)","description":"\u003cp\u003eCelebrate the Disney 100 character lineup in one display. This acrylic case for LEGO 71038 uses a light character background and tiered positions to frame the collection.\u003c\/p\u003e\u003ch2\u003eDisplay details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe light printed backdrop gives the individual characters a consistent setting.\u003c\/li\u003e\n\u003cli\u003eUse the figure positions shown to organise the collection and leave room for accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned for LEGO 71038 Disney 100 Minifigures. Match the exact set number on your box or instruction booklet before ordering.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eWidth: 47.1cm, Depth: 13cm, Height: 12.3cm\u003c\/p\u003e\u003cp\u003eAllow additional space around the complete display for placement and access.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3 mm clear acrylic case panels.\u003c\/li\u003e\n\u003cli\u003eAcrylic base and display structure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChoose your configuration\u003c\/h2\u003e\u003cp\u003eThis listing supplies the light character background configuration shown in the main product image.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAcrylic case panels and the display base shown.\u003c\/li\u003e\n\u003cli\u003ePrinted background in the selected background configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e\u003cp\u003eAssembly is required. Join the acrylic panels using the screws and connector cubes, then fit the cover to the base. The cover lifts away for access when you want to adjust the display.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eShipping charges and available services are calculated at checkout for your destination. Standard transit is estimated at 7–14 business days after dispatch; preparation time is additional. See the \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e for standard, special, custom and pre-order schedules.\u003c\/p\u003e\n\u003cp\u003eContact \u003ca href=\"mailto:info@cubebuff.com\"\u003einfo@cubebuff.com\u003c\/a\u003e within 30 days of delivery before returning anything. Eligible requests receive authorization within 48 hours. Custom-made, engraved or personalized products and items marked “Final Sale” are excluded from change-of-mind returns. See the \u003ca href=\"\/policies\/refund-policy\"\u003eReturns \u0026amp; Refunds Policy\u003c\/a\u003e for cancellation fees, return costs, refunds and EU withdrawal rights.\u003c\/p\u003e\u003ch2\u003eExplore more displays\u003c\/h2\u003e\u003cp\u003eBrowse \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-cases\"\u003eLEGO display cases\u003c\/a\u003e and compare the product fit and available space for your next display.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Light Character Background","offer_id":56171721032002,"sku":null,"price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb50-lego-71038-disney-100-minifigures-display-case-01-hero-20260915.webp?v=1789440940"},{"product_id":"lego-21317-steamboat-willie-display-case","title":"Acrylic Display Case for LEGO Steamboat Willie (21317)","description":"\u003cp\u003eFrame Steamboat Willie's monochrome boat in a clear acrylic enclosure. The black base gives the hull a defined outline, while the optional printed background adds a setting behind the paddle steamer.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eChoose Printed Background or Clear Background and check the corresponding gallery image. The cover lifts from the base for access, and the studded platform locates the boat inside the case.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 21317 Steamboat Willie. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eChoose Printed Background or Clear Background. The selected image shows the corresponding case configuration.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDimensions (external): Width: 34.2cm, Depth: 24.2cm, Height: 18.5cm\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Join the acrylic panels and fit the cover to the base. Place the case on a level surface and leave room to lift the cover for access.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-cases\"\u003eLEGO display cases\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Printed Background","offer_id":56178168987970,"sku":null,"price":92.0,"currency_code":"USD","in_stock":true},{"title":"Clear Background","offer_id":56178169020738,"sku":null,"price":81.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-21317-steamboat-willie-display-case-01-hero-20260915.webp?v=1789475650"}],"url":"https:\/\/www.cubebuff.com\/collections\/disney-display-cases.oembed","provider":"CubeBuff","version":"1.0","type":"link"}