{"title":"LEGO Display Stands \u0026 Bases","description":"\u003cp\u003eExplore acrylic display stands and bases for LEGO Star Wars ships, cars and motorcycles, plus wall-mounted BrickHeadz displays. Match the exact set number to find the support layout and presentation suited to your build.\u003c\/p\u003e\n\u003ch2\u003eChoose a format for your model\u003c\/h2\u003e\n\u003cp\u003eRaise a starship above its base, show a vehicle from an angle, or arrange BrickHeadz on wall shelves. Product pages show the supported set and the available configuration; display formats vary by model.\u003c\/p\u003e\n\u003ch2\u003ePlan space for the complete display\u003c\/h2\u003e\n\u003cp\u003eAllow room around the mounted model, including wings, bodywork and accessories. Where both stand-only and complete-display dimensions are listed, use the measurements with the model to plan your shelf.\u003c\/p\u003e\n\u003cp\u003eFor an enclosed format, browse our \u003ca href=\"\/collections\/lego-display-cases\"\u003eLEGO display cases\u003c\/a\u003e. Display products only; LEGO models and minifigures are not included.\u003c\/p\u003e","products":[{"product_id":"lego-75248-resistance-a-wing-display-stand","title":"Acrylic Display Stand for LEGO Star Wars Resistance A-Wing (75248)","description":"\u003cp\u003eLift your Resistance A-Wing into an angled display. Made for LEGO 75248, this stand combines a clear acrylic support with a black base and minifigure positions to keep the ship and characters together.\u003c\/p\u003e\u003ch2\u003eDisplay details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAn angled clear support raises the A-Wing above its base.\u003c\/li\u003e\n\u003cli\u003eStudded positions organize the minifigures beside the ship.\u003c\/li\u003e\n\u003cli\u003eThe complete display measures 19 cm wide, 20.5 cm deep and 20.5 cm high.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned for LEGO 75248 Resistance A-Wing. Match the set number on your box or instruction booklet before ordering.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMeasurement scope\u003c\/th\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003estand only\u003c\/td\u003e\n\u003ctd\u003e15 cm\u003c\/td\u003e\n\u003ctd\u003e11 cm\u003c\/td\u003e\n\u003ctd\u003e15.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003estand with model\u003c\/td\u003e\n\u003ctd\u003e19 cm\u003c\/td\u003e\n\u003ctd\u003e20.5 cm\u003c\/td\u003e\n\u003ctd\u003e20.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eMeasurements that include the model describe the complete display, not the stand alone. Allow space around the model for placement and access.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e5 mm black acrylic display base.\u003c\/li\u003e\n\u003cli\u003e5 mm clear acrylic model support.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChoose your configuration\u003c\/h2\u003e\u003cp\u003eThis listing includes the display stand and minifigure display positions. It is an open stand; no acrylic enclosure is included.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack 5 mm acrylic display base.\u003c\/li\u003e\n\u003cli\u003eClear 5 mm acrylic support for the model.\u003c\/li\u003e\n\u003cli\u003eStudded positions for displaying minifigures alongside the model.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e\u003cp\u003eAssembly is required. Slot the clear support into the black base, then attach the model using the connection provided for this stand.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eCheck the current \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e for destinations, charges and delivery information, and the \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for returns and cancellations.\u003c\/p\u003e\u003ch2\u003eExplore more displays\u003c\/h2\u003e\u003cp\u003eBrowse \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e and match the exact LEGO set number before choosing.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display stand and Minifigure add-on","offer_id":56168128610626,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb-lego-75248-resistance-a-wing-display-stand-01-hero-20260915.webp?v=1789430876"},{"product_id":"lego-75094-imperial-shuttle-tydirium-display-stand","title":"Acrylic Display Stand for LEGO Star Wars Imperial Shuttle Tydirium (75094)","description":"\u003cp\u003eGive your Imperial Shuttle Tydirium a hovering presentation. Designed for LEGO 75094, this stand uses a clear horizontal support above a black acrylic base to place the spacecraft at the center of your display.\u003c\/p\u003e\u003ch2\u003eDisplay details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eA horizontal support presents the shuttle above the base.\u003c\/li\u003e\n\u003cli\u003eStudded attachment points position the ship and its minifigures.\u003c\/li\u003e\n\u003cli\u003eAllow for the assembled display: 51 cm wide, 24.5 cm deep and 50 cm high.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned for LEGO 75094 Imperial Shuttle Tydirium. Match the set number on your box or instruction booklet before ordering.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eStand with model dimensions: W: 51.0cm D: 24.5cm H: 50.0cm\u003c\/p\u003e\u003cp\u003eMeasurements that include the model describe the complete display, not the stand alone. Allow space around the model for placement and access.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e5 mm black acrylic display base.\u003c\/li\u003e\n\u003cli\u003e5 mm clear acrylic model support.\u003c\/li\u003e\n\u003cli\u003eClear top plate with embedded studs for attaching the model.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChoose your configuration\u003c\/h2\u003e\u003cp\u003eThis listing includes the display stand and minifigure display positions. It is an open stand; no acrylic enclosure is included.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack 5 mm acrylic display base.\u003c\/li\u003e\n\u003cli\u003eClear 5 mm acrylic support for the model.\u003c\/li\u003e\n\u003cli\u003eClear top plate with embedded studs for attaching the model.\u003c\/li\u003e\n\u003cli\u003eStudded positions for displaying minifigures alongside the model.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e\u003cp\u003eAssembly is required. Slot the clear support into the black base, then attach the model using the connection provided for this stand.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eCheck the current \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e for destinations, charges and delivery information, and the \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for returns and cancellations.\u003c\/p\u003e\u003ch2\u003eExplore more displays\u003c\/h2\u003e\u003cp\u003eBrowse \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e and match the exact LEGO set number before choosing.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display stand and Minifigure add-on","offer_id":56168128643394,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb-lego-75094-imperial-shuttle-tydirium-display-stand-01-hero-20260915.webp?v=1789430875"},{"product_id":"lego-75300-imperial-tie-fighter-display-stand","title":"Acrylic Display Stand for LEGO Star Wars Imperial TIE Fighter (75300)","description":"\u003cp\u003eRaise your Imperial TIE Fighter above its display base and keep the accompanying characters close by. This acrylic stand is matched to LEGO 75300, with a clear support that keeps attention on the completed ship.\u003c\/p\u003e\u003ch2\u003eDisplay details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe clear support lifts and angles the ship for display.\u003c\/li\u003e\n\u003cli\u003eStudded positions make room for minifigures beside the model.\u003c\/li\u003e\n\u003cli\u003eCompare both measurements: the stand is 12 cm high; the complete display is 24 cm high.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned for LEGO 75300 Imperial TIE Fighter. Match the set number on your box or instruction booklet before ordering.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMeasurement scope\u003c\/th\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003estand only\u003c\/td\u003e\n\u003ctd\u003e18.5 cm\u003c\/td\u003e\n\u003ctd\u003e11 cm\u003c\/td\u003e\n\u003ctd\u003e12 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003estand with model\u003c\/td\u003e\n\u003ctd\u003e18.5 cm\u003c\/td\u003e\n\u003ctd\u003e14.5 cm\u003c\/td\u003e\n\u003ctd\u003e24 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eMeasurements that include the model describe the complete display, not the stand alone. Allow space around the model for placement and access.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e5 mm black acrylic display base.\u003c\/li\u003e\n\u003cli\u003e5 mm clear acrylic model support.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChoose your configuration\u003c\/h2\u003e\u003cp\u003eThis listing includes the display stand and minifigure display positions. It is an open stand; no acrylic enclosure is included.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack 5 mm acrylic display base.\u003c\/li\u003e\n\u003cli\u003eClear 5 mm acrylic support for the model.\u003c\/li\u003e\n\u003cli\u003eStudded positions for displaying minifigures alongside the model.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e\u003cp\u003eAssembly is required. Slot the clear support into the black base, then attach the model using the connection provided for this stand.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eCheck the current \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e for destinations, charges and delivery information, and the \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for returns and cancellations.\u003c\/p\u003e\u003ch2\u003eExplore more displays\u003c\/h2\u003e\u003cp\u003eBrowse \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e and match the exact LEGO set number before choosing.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display stand and Minifigure add-on","offer_id":56168128676162,"sku":null,"price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb-lego-75300-imperial-tie-fighter-display-stand-01-hero-20260915.webp?v=1789430878"},{"product_id":"lego-75273-poe-dameron-x-wing-display-stand","title":"Acrylic Display Stand for LEGO Star Wars Poe Dameron's X-Wing Fighter (75273)","description":"\u003cp\u003eGive Poe Dameron's X-Wing Fighter an angled flight pose. This display stand is designed for LEGO 75273, using a clear acrylic support and a black base with studded positions for the ship's minifigures.\u003c\/p\u003e\u003ch2\u003eDisplay details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eA slotted clear support holds the ship at its display angle.\u003c\/li\u003e\n\u003cli\u003eMinifigure positions keep the characters alongside the X-Wing.\u003c\/li\u003e\n\u003cli\u003eAllow 37 cm of depth for the complete display; the stand alone is 11 cm deep.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned for LEGO 75273 Poe Dameron's X-Wing Fighter. Match the set number on your box or instruction booklet before ordering.\u003c\/p\u003e\u003cp\u003eChoose by the exact set number; models sharing this name can have different dimensions and attachment points.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMeasurement scope\u003c\/th\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003estand only\u003c\/td\u003e\n\u003ctd\u003e22 cm\u003c\/td\u003e\n\u003ctd\u003e11 cm\u003c\/td\u003e\n\u003ctd\u003e17.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003estand with model\u003c\/td\u003e\n\u003ctd\u003e31.5 cm\u003c\/td\u003e\n\u003ctd\u003e37 cm\u003c\/td\u003e\n\u003ctd\u003e27.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eMeasurements that include the model describe the complete display, not the stand alone. Allow space around the model for placement and access.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e5 mm black acrylic display base.\u003c\/li\u003e\n\u003cli\u003e5 mm clear acrylic model support.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChoose your configuration\u003c\/h2\u003e\u003cp\u003eThis listing includes the display stand and minifigure display positions. It is an open stand; no acrylic enclosure is included.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack 5 mm acrylic display base.\u003c\/li\u003e\n\u003cli\u003eClear 5 mm acrylic support for the model.\u003c\/li\u003e\n\u003cli\u003eStudded positions for displaying minifigures alongside the model.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e\u003cp\u003eAssembly is required. Slot the clear support into the black base, then attach the model using the connection provided for this stand.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eCheck the current \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e for destinations, charges and delivery information, and the \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for returns and cancellations.\u003c\/p\u003e\u003ch2\u003eExplore more displays\u003c\/h2\u003e\u003cp\u003eBrowse \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e and match the exact LEGO set number before choosing.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display stand and Minifigure add-on","offer_id":56168128708930,"sku":null,"price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb-lego-75273-poe-dameron-x-wing-display-stand-01-hero-20260915.webp?v=1789430876"},{"product_id":"lego-75179-kylo-ren-tie-fighter-display-stand","title":"Acrylic Display Stand for LEGO Star Wars Kylo Ren's TIE Fighter (75179)","description":"\u003cp\u003ePut Kylo Ren's TIE Fighter into a flight-inspired pose. This acrylic display stand for LEGO 75179 lifts and angles the ship above a black base, while studded positions keep your minifigures alongside it.\u003c\/p\u003e\u003ch2\u003eDisplay details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAn angled clear support brings the ship into view above its base.\u003c\/li\u003e\n\u003cli\u003eA studded top plate provides the attachment point for the model.\u003c\/li\u003e\n\u003cli\u003ePlan for the complete display: 36 cm wide, 46 cm deep and 34 cm high with the model.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned for LEGO 75179 Kylo Ren's TIE Fighter. Match the set number on your box or instruction booklet before ordering.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eStand with model measurements: W: 36.0cm D: 46.0cm H: 34.0cm\u003c\/p\u003e\u003cp\u003eMeasurements that include the model describe the complete display, not the stand alone. Allow space around the model for placement and access.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e5 mm black acrylic display base.\u003c\/li\u003e\n\u003cli\u003e5 mm clear acrylic model support.\u003c\/li\u003e\n\u003cli\u003eClear top plate with embedded studs for attaching the model.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChoose your configuration\u003c\/h2\u003e\u003cp\u003eThis listing includes the display stand and minifigure display positions. It is an open stand; no acrylic enclosure is included.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack 5 mm acrylic display base.\u003c\/li\u003e\n\u003cli\u003eClear 5 mm acrylic support for the model.\u003c\/li\u003e\n\u003cli\u003eClear top plate with embedded studs for attaching the model.\u003c\/li\u003e\n\u003cli\u003eStudded positions for displaying minifigures alongside the model.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e\u003cp\u003eAssembly is required. Slot the clear support into the black base, then attach the model using the connection provided for this stand.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eCheck the current \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e for destinations, charges and delivery information, and the \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for returns and cancellations.\u003c\/p\u003e\u003ch2\u003eExplore more displays\u003c\/h2\u003e\u003cp\u003eBrowse \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e and match the exact LEGO set number before choosing.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display stand and Minifigure add-on","offer_id":56168128807234,"sku":null,"price":37.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb-lego-75179-kylo-ren-tie-fighter-display-stand-01-hero-20260915.webp?v=1789430876"},{"product_id":"lego-75218-x-wing-starfighter-display-stand","title":"Acrylic Display Stand for LEGO Star Wars X-Wing Starfighter (75218)","description":"\u003cp\u003eBring your X-Wing Starfighter into a flight-inspired display. This angled stand for LEGO 75218 supports the model above a black acrylic base and gives its minifigures a place beside the ship.\u003c\/p\u003e\u003ch2\u003eDisplay details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAn angled clear support presents the X-Wing in flight mode.\u003c\/li\u003e\n\u003cli\u003eA studded top plate provides the model attachment point.\u003c\/li\u003e\n\u003cli\u003eThe stand and model together measure 32 cm wide, 28 cm deep and 29.5 cm high.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned for LEGO 75218 X-Wing Starfighter. Match the set number on your box or instruction booklet before ordering.\u003c\/p\u003e\u003cp\u003eChoose by the exact set number; models sharing this name can have different dimensions and attachment points.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eStand with model measurements: W: 32.0cm D: 28.0cm H: 29.5cm\u003c\/p\u003e\u003cp\u003eMeasurements that include the model describe the complete display, not the stand alone. Allow space around the model for placement and access.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e5 mm black acrylic display base.\u003c\/li\u003e\n\u003cli\u003e5 mm clear acrylic model support.\u003c\/li\u003e\n\u003cli\u003eClear top plate with embedded studs for attaching the model.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChoose your configuration\u003c\/h2\u003e\u003cp\u003eThis listing includes the display stand and minifigure display positions. It is an open stand; no acrylic enclosure is included.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack 5 mm acrylic display base.\u003c\/li\u003e\n\u003cli\u003eClear 5 mm acrylic support for the model.\u003c\/li\u003e\n\u003cli\u003eClear top plate with embedded studs for attaching the model.\u003c\/li\u003e\n\u003cli\u003eStudded positions for displaying minifigures alongside the model.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e\u003cp\u003eAssembly is required. Slot the clear support into the black base, then attach the model using the connection provided for this stand.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eCheck the current \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e for destinations, charges and delivery information, and the \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for returns and cancellations.\u003c\/p\u003e\u003ch2\u003eExplore more displays\u003c\/h2\u003e\u003cp\u003eBrowse \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e and match the exact LEGO set number before choosing.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display stand and Minifigure add-on","offer_id":56168128840002,"sku":null,"price":37.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb-lego-75218-x-wing-starfighter-display-stand-01-hero-20260915.webp?v=1789430876"},{"product_id":"lego-75249-resistance-y-wing-display-stand","title":"Acrylic Display Stand for LEGO Star Wars Resistance Y-Wing (75249)","description":"\u003cp\u003ePresent your Resistance Y-Wing at an angle and give its shape room to be seen. This acrylic stand is designed for LEGO 75249, with a clear support and black base that place the finished ship above the display surface.\u003c\/p\u003e\u003ch2\u003eDisplay details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe angled support gives the ship a flight-inspired presentation.\u003c\/li\u003e\n\u003cli\u003eStudded positions display the minifigures with the model.\u003c\/li\u003e\n\u003cli\u003ePlan for 35 cm width and 33.5 cm depth with the ship, compared with a 25 cm by 11 cm stand footprint.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned for LEGO 75249 Resistance Y-Wing. Match the set number on your box or instruction booklet before ordering.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMeasurement scope\u003c\/th\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003estand only\u003c\/td\u003e\n\u003ctd\u003e25 cm\u003c\/td\u003e\n\u003ctd\u003e11 cm\u003c\/td\u003e\n\u003ctd\u003e17 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003estand with model\u003c\/td\u003e\n\u003ctd\u003e35 cm\u003c\/td\u003e\n\u003ctd\u003e33.5 cm\u003c\/td\u003e\n\u003ctd\u003e30.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eMeasurements that include the model describe the complete display, not the stand alone. Allow space around the model for placement and access.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e5 mm black acrylic display base.\u003c\/li\u003e\n\u003cli\u003e5 mm clear acrylic model support.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChoose your configuration\u003c\/h2\u003e\u003cp\u003eThis listing includes the display stand and minifigure display positions. It is an open stand; no acrylic enclosure is included.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack 5 mm acrylic display base.\u003c\/li\u003e\n\u003cli\u003eClear 5 mm acrylic support for the model.\u003c\/li\u003e\n\u003cli\u003eStudded positions for displaying minifigures alongside the model.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e\u003cp\u003eAssembly is required. Slot the clear support into the black base, then attach the model using the connection provided for this stand.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eCheck the current \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e for destinations, charges and delivery information, and the \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for returns and cancellations.\u003c\/p\u003e\u003ch2\u003eExplore more displays\u003c\/h2\u003e\u003cp\u003eBrowse \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e and match the exact LEGO set number before choosing.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display stand and Minifigure add-on","offer_id":56168128872770,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb-lego-75249-resistance-y-wing-display-stand-01-hero-20260915.webp?v=1789430876"},{"product_id":"lego-75105-millennium-falcon-display-stand","title":"Acrylic Display Stand for LEGO Star Wars Millennium Falcon (75105)","description":"\u003cp\u003eGive your Millennium Falcon an angled place in the fleet. Designed for LEGO 75105, this acrylic stand uses clear supports and two studded top plates to present the ship above a black display base.\u003c\/p\u003e\u003ch2\u003eDisplay details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAn angled presentation makes the completed ship a focus of the display.\u003c\/li\u003e\n\u003cli\u003eTwo clear studded top plates provide the model attachment points.\u003c\/li\u003e\n\u003cli\u003ePlan a complete display footprint of 45.5 cm wide by 27 cm deep, with a height of 30 cm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned for LEGO 75105 Millennium Falcon. Match the set number on your box or instruction booklet before ordering.\u003c\/p\u003e\u003cp\u003eChoose by the exact set number; models sharing this name can have different dimensions and attachment points.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eStand with model dimensions: W: 45.5cm D: 27.0cm H: 30.0cm\u003c\/p\u003e\u003cp\u003eMeasurements that include the model describe the complete display, not the stand alone. Allow space around the model for placement and access.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e5 mm black acrylic display base.\u003c\/li\u003e\n\u003cli\u003e5 mm clear acrylic supports with two clear studded top plates.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChoose your configuration\u003c\/h2\u003e\u003cp\u003eThis listing includes the display stand and minifigure display positions. It is an open stand; no acrylic enclosure is included.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack 5 mm acrylic display base.\u003c\/li\u003e\n\u003cli\u003eClear 5 mm acrylic supports with two studded top plates.\u003c\/li\u003e\n\u003cli\u003eStudded positions for displaying minifigures alongside the model.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e\u003cp\u003eAssembly is required. Slot the clear support into the black base, then attach the model using the connection provided for this stand.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eCheck the current \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e for destinations, charges and delivery information, and the \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for returns and cancellations.\u003c\/p\u003e\u003ch2\u003eExplore more displays\u003c\/h2\u003e\u003cp\u003eBrowse \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e and match the exact LEGO set number before choosing.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display stand and Minifigure add-on","offer_id":56168128905538,"sku":null,"price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb-lego-75105-millennium-falcon-display-stand-01-hero-20260915.webp?v=1789430877"},{"product_id":"lego-75315-imperial-light-cruiser-display-stand","title":"Acrylic Display Stand for LEGO Star Wars Imperial Light Cruiser (75315)","description":"\u003cp\u003eRaise the Imperial Light Cruiser above its crew. Designed for LEGO 75315, this acrylic stand holds the ship on clear supports above a black base with studded positions for the minifigures.\u003c\/p\u003e\u003ch2\u003eDisplay details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClear supports present the ship above the base in a flight-style display.\u003c\/li\u003e\n\u003cli\u003eStudded attachment plates connect the stand to the underside of the model.\u003c\/li\u003e\n\u003cli\u003ePlan for a complete display measuring 57 cm wide, 20 cm deep and 24 cm high with the model.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned for LEGO 75315 Star Wars Imperial Light Cruiser. Match the exact set number on your box or instruction booklet before ordering.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDimensions (stand only): Width: 34.5cm, Depth: 19.5cm, Height: 13.2cm Dimensions (with collectible): Width: 57cm, Depth: 20cm, Height: 24cm\u003c\/p\u003e\u003cp\u003eThe dimensions with the model describe the complete display. Allow space around the ship for placement and access.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e5 mm black acrylic display base.\u003c\/li\u003e\n\u003cli\u003e5 mm clear acrylic supports with studded top plates.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChoose your configuration\u003c\/h2\u003e\u003cp\u003eThis listing includes the display stand and minifigure display positions. It is an open stand; no acrylic enclosure is included.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e5 mm black acrylic display base.\u003c\/li\u003e\n\u003cli\u003e5 mm clear acrylic supports with studded top plates.\u003c\/li\u003e\n\u003cli\u003eStudded positions for displaying minifigures alongside the model.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e\u003cp\u003eAssembly is required. Slot the clear supports into the black base, then connect the model using the studded attachment plates provided for this stand.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eCheck the current \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e for destinations, charges and delivery information, and the \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for returns and cancellations.\u003c\/p\u003e\u003ch2\u003eExplore more displays\u003c\/h2\u003e\u003cp\u003eBrowse \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e and choose by the exact LEGO set number for your next display.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display stand and Minifigure add-on","offer_id":56170981491010,"sku":null,"price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb-lego-75315-imperial-light-cruiser-display-stand-01-hero-20260915.webp?v=1789433484"},{"product_id":"lego-21309-saturn-v-wall-mounted-display-stand","title":"Acrylic Wall Mounted Display Stand for LEGO NASA Apollo Saturn V (21309)","description":"\u003cp\u003eMove the Saturn V from the shelf to the wall. This clear acrylic mount presents LEGO 21309 horizontally, keeping the length of the rocket in view.\u003c\/p\u003e\u003ch2\u003eDisplay details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eA horizontal wall display makes use of vertical space for the long rocket.\u003c\/li\u003e\n\u003cli\u003eCheck the complete model display dimensions when planning the space around the stand.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned for LEGO 21309 NASA Apollo Saturn V. Match the exact set number on your box or instruction booklet before ordering.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eProduct dimensions (excluding model): W: 46.7cm D: 12.9cm H: 14.9cm\u003c\/p\u003e\u003cp\u003eAllow additional space around the complete display for placement and access.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eAcrylic supports and mounting structure.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eChoose your configuration\u003c\/h2\u003e\u003cp\u003eThis listing supplies the wall mounted display stand configuration shown in the main product image. This is an open stand; an acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eAcrylic wall mount and supports.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e\u003cp\u003eAssembly and wall installation are required. Assemble the mount, fix it securely to a suitable wall and position the model on the clear supports. Choose fixings suitable for the wall surface.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eCheck the current \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e for destinations, charges and delivery information, and the \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for returns and cancellations.\u003c\/p\u003e\u003ch2\u003eExplore more displays\u003c\/h2\u003e\u003cp\u003eBrowse \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e and compare the product fit and available space for your next display.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Wall Mounted Display Stand","offer_id":56171716477250,"sku":null,"price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/21309-st-wall-frame-hero.webp?v=1790251982"},{"product_id":"lego-75331-razor-crest-display-stand","title":"Acrylic Display Stand for LEGO UCS The Razor Crest (75331)","description":"\u003cp\u003eGive the Razor Crest a flight-style presentation. This acrylic stand raises LEGO 75331 above a black base and leaves room for its characters alongside the ship.\u003c\/p\u003e\u003ch2\u003eDisplay details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClear supports angle the ship so its shape can be seen from the front and side.\u003c\/li\u003e\n\u003cli\u003eCheck the complete model display dimensions when planning the space around the stand.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned for LEGO 75331 UCS The Razor Crest. Match the exact set number on your box or instruction booklet before ordering.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDimensions (stand only): Width: 40.8cm, depth: 30.4cm, height: 23.6cm Dimensions (with collectible): Width: 72cm, depth: 42cm, height: 49cm\u003c\/p\u003e\u003cp\u003eAllow additional space around the complete display for placement and access.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eBlack acrylic base and clear acrylic supports.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eChoose your configuration\u003c\/h2\u003e\u003cp\u003eThis listing supplies the display stand configuration shown in the main product image. This is an open stand; an acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAcrylic display base and model supports.\u003c\/li\u003e\n\u003cli\u003eMinifigure display positions as shown.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base, then position the model using the attachment points for this stand.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eCheck the current \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e for destinations, charges and delivery information, and the \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for returns and cancellations.\u003c\/p\u003e\u003ch2\u003eExplore more displays\u003c\/h2\u003e\u003cp\u003eBrowse \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e and compare the product fit and available space for your next display.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display Stand","offer_id":56171716575554,"sku":null,"price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb50-lego-75331-razor-crest-display-stand-01-hero-20260915.webp?v=1789440740"},{"product_id":"lego-75252-imperial-star-destroyer-display-stand","title":"Acrylic Display Stand for LEGO UCS Imperial Star Destroyer (75252)","description":"\u003cp\u003eChoose how the Star Destroyer meets the room. This acrylic stand for LEGO 75252 offers horizontal and angled configurations so you can plan both the viewing angle and the space around the ship.\u003c\/p\u003e\u003ch2\u003eDisplay details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe angled and horizontal versions have different complete-display heights and depths.\u003c\/li\u003e\n\u003cli\u003eCheck the complete model display dimensions when planning the space around the stand.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned for LEGO 75252 UCS Imperial Star Destroyer. Match the exact set number on your box or instruction booklet before ordering.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDimensions, Horizontal (stand only): Width: 36.5cm, Depth: 33.5cm, Height: 24.5cm Dimensions, Horizontal (with collectible): Width: 111cm, Depth: 65.5cm, Height: 46cm Dimensions, Angled (stand only): Width: 36.5cm, Depth: 33.5cm, Height: 24.5cm Dimensions, Angled (with collectible): Width: 111cm, Depth: 59cm, Height: 56cm\u003c\/p\u003e\u003cp\u003eAllow additional space around the complete display for placement and access.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eBlack acrylic base and clear acrylic supports.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eChoose your configuration\u003c\/h2\u003e\u003cp\u003eAvailable display angle options: Horizontal, Angled. Match the selected configuration to its product image. This is an open stand; an acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAcrylic display base and model supports.\u003c\/li\u003e\n\u003cli\u003eMinifigure display positions as shown.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base, then position the model using the attachment points for this stand.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eCheck the current \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e for destinations, charges and delivery information, and the \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for returns and cancellations.\u003c\/p\u003e\u003ch2\u003eExplore more displays\u003c\/h2\u003e\u003cp\u003eBrowse \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e and compare the product fit and available space for your next display.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Horizontal","offer_id":56171718738242,"sku":null,"price":92.0,"currency_code":"USD","in_stock":true},{"title":"Angled","offer_id":56171718771010,"sku":null,"price":92.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb50-lego-75252-imperial-star-destroyer-display-stand-01-hero-20260915.webp?v=1789440837"},{"product_id":"lego-75172-y-wing-starfighter-display-stand","title":"Acrylic Display Stand for LEGO Y-Wing Starfighter (75172)","description":"\u003cp\u003eLift the Y-Wing into a flight-style display. This acrylic stand for LEGO 75172 uses a clear angled support above a black base, with space for the minifigures alongside the ship.\u003c\/p\u003e\u003ch2\u003eDisplay details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe open stand leaves the wings, engines and underside visible around the model.\u003c\/li\u003e\n\u003cli\u003eCheck the complete model display dimensions when planning the space around the stand.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned for LEGO 75172 Y-Wing Starfighter. Match the exact set number on your box or instruction booklet before ordering.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDisplay stand plus product dimensions: W: 25.0cm D: 39.0cm H: 27.0cm\u003c\/p\u003e\u003cp\u003eAllow additional space around the complete display for placement and access.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eBlack acrylic base and clear acrylic supports.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eChoose your configuration\u003c\/h2\u003e\u003cp\u003eThis listing supplies the display stand configuration shown in the main product image. This is an open stand; an acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAcrylic display base and model supports.\u003c\/li\u003e\n\u003cli\u003eMinifigure display positions as shown.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base, then position the model using the attachment points for this stand.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eCheck the current \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e for destinations, charges and delivery information, and the \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for returns and cancellations.\u003c\/p\u003e\u003ch2\u003eExplore more displays\u003c\/h2\u003e\u003cp\u003eBrowse \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e and compare the product fit and available space for your next display.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display Stand","offer_id":56171719655746,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb50-lego-75172-y-wing-starfighter-display-stand-01-hero-20260915.webp?v=1789440836"},{"product_id":"lego-10277-crocodile-locomotive-display-base","title":"Acrylic Display Base for LEGO Crocodile Locomotive (10277)","description":"\u003cp\u003eGive the Crocodile Locomotive a defined place on the shelf. This black acrylic display base is designed for LEGO 10277 and uses studded attachment points to locate the train display.\u003c\/p\u003e\u003ch2\u003eDisplay details\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eThis is the open display base configuration, with the locomotive visible from every side.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eDesigned for LEGO 10277 Crocodile Locomotive. Match the exact set number on your box or instruction booklet before ordering.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e5 mm black acrylic display base with studded attachment points.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eChoose your configuration\u003c\/h2\u003e\u003cp\u003eThis listing is the display base only. An acrylic case or printed background is not included.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eBlack acrylic display base with studded attachment points.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e\u003cp\u003ePosition the base on a level surface and locate the model using the matching studs. This listing supplies the base; an acrylic cover is not included.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eCheck the current \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e for destinations, charges and delivery information, and the \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for returns and cancellations.\u003c\/p\u003e\u003ch2\u003eExplore more displays\u003c\/h2\u003e\u003cp\u003eBrowse \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e and compare the product fit and available space for your next display.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display Base","offer_id":56171719819586,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb50-lego-10277-crocodile-locomotive-display-base-01-hero-20260915.webp?v=1789440854"},{"product_id":"large-clear-acrylic-vase-for-brick-flowers","title":"Large Clear Acrylic Vase for LEGO Flowers","description":"\u003cp\u003eArrange brick-built flowers in a vase that keeps the stems visible. This large clear acrylic vase offers six decorative designs and individual positions for up to 24 flower stems.\u003c\/p\u003e\u003ch2\u003eDisplay details\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eChoose a design to frame the bouquet while leaving the flower arrangement in view.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eFor brick-built LEGO flower arrangements. The large vase has positions for up to 24 stems. Check the size and stem arrangement for your bouquet; flowers and smaller vases shown in lifestyle images are display examples.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eWidth 12cm x Depth 12cm x Height 18cm\u003c\/p\u003e\u003cp\u003eAllow additional space around the complete display for placement and access.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eClear acrylic panels with magnetic top and base connections.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eChoose your configuration\u003c\/h2\u003e\u003cp\u003eAvailable design options: Classic, Art Deco, Wavy, Scalloped Edge, Circle Detail, Cross Etched. Match the selected configuration to its product image. Lifestyle images may show other vase sizes; this listing is one large clear vase, 12 x 12 x 18 cm.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eOne large clear acrylic vase in the selected design.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eLEGO models, flowers and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003ch2\u003eAssembly\u003c\/h2\u003e\u003cp\u003eAssemble the acrylic vase panels and magnetic top and base pieces. Place the brick-built flower stems in the individual positions and balance the arrangement before displaying it.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eCheck the current \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e for destinations, charges and delivery information, and the \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for returns and cancellations.\u003c\/p\u003e\u003ch2\u003eExplore more displays\u003c\/h2\u003e\u003cp\u003eBrowse \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e and compare the product fit and available space for your next display.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Classic","offer_id":56171725619522,"sku":null,"price":54.0,"currency_code":"USD","in_stock":true},{"title":"Art Deco","offer_id":56171725652290,"sku":null,"price":47.0,"currency_code":"USD","in_stock":true},{"title":"Wavy","offer_id":56171725685058,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true},{"title":"Scalloped Edge","offer_id":56171725717826,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true},{"title":"Circle Detail","offer_id":56171725750594,"sku":null,"price":54.0,"currency_code":"USD","in_stock":true},{"title":"Cross Etched","offer_id":56171725783362,"sku":null,"price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb50-display-vase-for-lego-flower-bouquet-10280-01-hero-20260915.webp?v=1789441107"},{"product_id":"lego-75258-anakins-podracer-display-stand","title":"Acrylic Display Stand for LEGO Anakin's Podracer (75258)","description":"\u003cp\u003eGive Anakin's twin-engine racer a raised display position, with the cockpit and engine assembly visible together. This acrylic stand is made for LEGO Star Wars set 75258.\u003c\/p\u003e\u003ch2\u003eDisplay the completed build\u003c\/h2\u003e\u003cp\u003eThe clear support lifts the podracer above the black base, while the side positions keep the minifigures beside the build. The open presentation leaves the long engine-to-cockpit layout in view.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eFor LEGO 75258 Anakin's Podracer. Match the exact set number before ordering; similarly named models can require a different stand.\u003c\/p\u003e\u003ch2\u003eMaterials and configuration\u003c\/h2\u003e\u003cp\u003eThe stand uses a 5 mm black gloss acrylic base and 5 mm clear acrylic supports. The configuration shown includes minifigure display positions. This is an open display stand; an acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eBefore you order\u003c\/h2\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003ch2\u003eAssembly and placement\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before positioning the model. Place the completed display on a level surface and allow clearance around the full build.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eCheck the current \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e for destinations, charges and delivery information, and the \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for returns and cancellations.\u003c\/p\u003e\u003cp\u003eExplore more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e for your collection.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Stand with Minifigure Positions","offer_id":56172103532866,"sku":null,"price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cbr-lego-75258-anakins-podracer-display-stand-01-hero-20260915.webp?v=1789449112"},{"product_id":"lego-75259-20th-anniversary-snowspeeder-display-stand","title":"Acrylic Display Stand for LEGO 20th Anniversary Snowspeeder (75259)","description":"\u003cp\u003eShow the cockpit, wings and forward cannons of the 20th Anniversary Snowspeeder from an elevated angle. This acrylic display stand fits LEGO Star Wars set 75259.\u003c\/p\u003e\u003ch2\u003eDisplay the completed build\u003c\/h2\u003e\u003cp\u003eThe angled support turns the top of the craft towards the viewer. Separate minifigure positions flank the main base, keeping the pilots alongside the Snowspeeder without obscuring it.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eFor LEGO 75259 20th Anniversary Snowspeeder. Match the exact set number before ordering; similarly named models can require a different stand.\u003c\/p\u003e\u003ch2\u003eMaterials and configuration\u003c\/h2\u003e\u003cp\u003eThe stand uses a 5 mm black gloss acrylic base and 5 mm clear acrylic supports. The configuration shown includes minifigure display positions. This is an open display stand; an acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eBefore you order\u003c\/h2\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003ch2\u003eAssembly and placement\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before positioning the model. Place the completed display on a level surface and allow clearance around the full build.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eCheck the current \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e for destinations, charges and delivery information, and the \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for returns and cancellations.\u003c\/p\u003e\u003cp\u003eExplore more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e for your collection.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Stand with Minifigure Positions","offer_id":56172103598402,"sku":null,"price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cbr-lego-75259-20th-anniversary-snowspeeder-display-stand-01-hero-20260915.webp?v=1789449112"},{"product_id":"lego-76285-spider-man-mask-wall-mounted-display-stand","title":"Acrylic Wall Mounted Display Stand for LEGO Spider-Man's Mask (76285)","description":"\u003cp\u003eGive Spider-Man's Mask a place on the wall while keeping its original LEGO base and nameplate visible. This wall mounted acrylic stand is shown supporting LEGO Marvel set 76285.\u003c\/p\u003e\u003ch2\u003eFree up the shelf\u003c\/h2\u003e\u003cp\u003eThe clear platform projects from a black wall bracket, leaving the red mask as the focus of the display. Product-only views show the platform shape, bracket and connection details before you choose a position.\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eFor LEGO 76285 Spider-Man's Mask. Match the exact set number before ordering. The product is an open wall mounted stand, with no enclosing acrylic cover.\u003c\/p\u003e\u003ch2\u003eStand dimensions\u003c\/h2\u003e\u003cp\u003eStand dimensions: 11 cm wide × 16.1 cm deep × 9.4 cm high. These measurements describe the stand; allow additional clearance for the completed LEGO model.\u003c\/p\u003e\u003ch2\u003eBefore you order\u003c\/h2\u003e\u003cp\u003eThe LEGO mask, its original LEGO base and nameplate are display props and are not included. A separate accessory information plaque is not included.\u003c\/p\u003e\u003ch2\u003eWall placement\u003c\/h2\u003e\u003cp\u003eChoose a wall position that leaves clearance around the full mask. Check the wall construction and use a mounting method suitable for it before placing the model on the stand.\u003c\/p\u003e\u003ch2\u003eShipping and returns\u003c\/h2\u003e\u003cp\u003eCheck the current \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e for destinations, charges and delivery information, and the \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for returns and cancellations.\u003c\/p\u003e\u003cp\u003eExplore more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e for your collection.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Wall Mounted Display Stand","offer_id":56172213109058,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cbr-lego-76285-spider-man-mask-wall-mounted-display-stand-01-hero-20260915.webp?v=1789450353"},{"product_id":"lego-42141-mclaren-f1-car-display-base","title":"Acrylic Display Base for LEGO McLaren Formula 1 Race Car (42141)","description":"\u003cp\u003eGive the Technic McLaren a defined place on your shelf with a base sized around its long race-car layout. The clear supports lift the model above the black platform so its bodywork and exposed mechanical details stay in view.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eTwo clear 5 mm stems slot into the base and locate the completed car. Plan space for the full front wing and rear tyres, rather than measuring only the support platform.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 42141 McLaren Formula 1 Race Car. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display base is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDimensions (excluding set): Width: 48cm Depth: 32.7cm Height 5.3cm\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display Base","offer_id":56178168889666,"sku":null,"price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-42141-mclaren-f1-car-display-base-01-hero-20260915.webp?v=1789475651"},{"product_id":"lego-75309-ucs-republic-gunship-display-base","title":"Acrylic Display Base for LEGO UCS Republic Gunship (75309)","description":"\u003cp\u003eBuild a display around the broad wings and open troop bays of the UCS Republic Gunship. This acrylic base and support arrangement raises the large model and gives its minifigures a separate place beside it.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe two-tier black base accepts clear supports shaped for this set. Its display footprint grows substantially once the gunship is mounted, so use the dimensions with the model when choosing a shelf.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 75309 UCS Republic Gunship. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display base is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMeasurement scope\u003c\/th\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003estand only\u003c\/td\u003e\n\u003ctd\u003e42 cm\u003c\/td\u003e\n\u003ctd\u003e32.3 cm\u003c\/td\u003e\n\u003ctd\u003e18.2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ewith collectible\u003c\/td\u003e\n\u003ctd\u003e74 cm\u003c\/td\u003e\n\u003ctd\u003e68 cm\u003c\/td\u003e\n\u003ctd\u003e35.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display Base","offer_id":56178168922434,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-75309-ucs-republic-gunship-display-base-01-hero-20260915.webp?v=1789475651"},{"product_id":"lego-10298-vespa-125-display-base","title":"Acrylic Display Base for LEGO Vespa 125 (10298)","description":"\u003cp\u003eShow the Vespa's curved front shield, pale-blue bodywork and small rear luggage arrangement from an elevated angle. This display base supports the scooter on clear acrylic stems above a black platform.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe set-specific support layout includes a clear add-on beneath the model. Keep the side profile visible when choosing the display direction, with enough clearance around the handlebar and rear accessories.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 10298 Vespa 125. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display base is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDimensions (excluding model): Width: 34.1cm Depth: 16cm Height 6.3cm\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display Base","offer_id":56178168955202,"sku":null,"price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-10298-vespa-125-display-base-01-hero-20260915.webp?v=1789475651"},{"product_id":"lego-10265-ford-mustang-display-stand","title":"Acrylic Display Stand for LEGO Ford Mustang (10265)","description":"\u003cp\u003eTurn the completed Mustang towards the viewer instead of leaving its roof and bonnet hidden from a low shelf angle. Clear acrylic supports present the car at a tilt above a black base.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe stand is shaped around the 10265 model and uses 5 mm acrylic for the base and support. Leave clearance around the car's full length, including the bonnet and rear bodywork.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 10265 Ford Mustang. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMeasurement scope\u003c\/th\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003estand only\u003c\/td\u003e\n\u003ctd\u003e14 cm\u003c\/td\u003e\n\u003ctd\u003e20 cm\u003c\/td\u003e\n\u003ctd\u003e5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ewith collectible\u003c\/td\u003e\n\u003ctd\u003e35.5 cm\u003c\/td\u003e\n\u003ctd\u003e20 cm\u003c\/td\u003e\n\u003ctd\u003e14.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display Stand","offer_id":56178169119042,"sku":null,"price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-10265-ford-mustang-display-stand-01-hero-20260915.webp?v=1789475648"},{"product_id":"lego-76127-captain-marvel-quinjet-display-stand","title":"Acrylic Display Stand for LEGO Captain Marvel and The Skrull Attack (76127)","description":"\u003cp\u003eBring the Captain Marvel Quinjet into an elevated display with its figures arranged beside the craft. The open stand keeps the nose, wings and cockpit visible above a compact black base.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eClear supports angle the aircraft while the minifigure add-on keeps the accompanying characters within the same display. This stand is matched to the 76127 build, rather than other Quinjet versions.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 76127 Captain Marvel and The Skrull Attack. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMeasurement scope\u003c\/th\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003estand only\u003c\/td\u003e\n\u003ctd\u003e22 cm\u003c\/td\u003e\n\u003ctd\u003e11 cm\u003c\/td\u003e\n\u003ctd\u003e11 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ewith collectible\u003c\/td\u003e\n\u003ctd\u003e30 cm\u003c\/td\u003e\n\u003ctd\u003e18 cm\u003c\/td\u003e\n\u003ctd\u003e25 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Stand with Minifigure Positions","offer_id":56178169151810,"sku":null,"price":37.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-76127-captain-marvel-quinjet-display-stand-01-hero-20260915.webp?v=1789475648"},{"product_id":"lego-76081-milano-display-stand","title":"Acrylic Display Stand for LEGO The Milano vs. The Abilisk (76081)","description":"\u003cp\u003eLet the Milano's swept wings and orange-and-blue colour scheme lead the display. This stand raises the spacecraft above its black base, with an accompanying position for the set's minifigures.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe open arrangement shows the model's shape without enclosure panels around it. Measure the full mounted wingspan and body length when planning where the Milano will sit.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 76081 The Milano vs. The Abilisk. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDisplay stand plus product measurements: W: 35.0cm D: 17.0cm H: 24.0cm\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Stand with Minifigure Positions","offer_id":56178169250114,"sku":null,"price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-76081-milano-display-stand-01-hero-20260915.webp?v=1789475649"},{"product_id":"lego-7669-anakin-s-starfighter-display-stand","title":"Acrylic Display Stand for LEGO Anakin's Jedi Starfighter (7669)","description":"\u003cp\u003eGive Anakin's compact yellow starfighter a flight-style presentation. An angled clear support lifts the model above a black octagonal base and leaves its pointed nose and wing outline easy to see.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe minifigure add-on places the pilot beside the ship. The support geometry is intended for set 7669, so check that number when comparing it with later Anakin starfighter models.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 7669 Anakin's Jedi Starfighter. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDisplay stand plus product measurements: W: 18.0cm D: 20.5cm H: 21.5cm\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Stand with Minifigure Positions","offer_id":56178170462530,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-7669-anakin-s-starfighter-display-stand-01-hero-20260915.webp?v=1789475648"},{"product_id":"lego-75050-b-wing-display-stand","title":"Acrylic Display Stand for LEGO B-Wing (75050)","description":"\u003cp\u003eDisplay the B-Wing's unusually tall wing arrangement with the body raised on a clear acrylic support. The black base anchors the presentation while the figures remain visible alongside the spacecraft.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThis stand uses a 5 mm base and clear support for the 75050 model. Its completed display is considerably taller and wider than the empty stand, so check model clearance on every side.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 75050 B-Wing. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMeasurement scope\u003c\/th\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003estand only\u003c\/td\u003e\n\u003ctd\u003e19 cm\u003c\/td\u003e\n\u003ctd\u003e10.5 cm\u003c\/td\u003e\n\u003ctd\u003e17.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ewith collectible\u003c\/td\u003e\n\u003ctd\u003e32 cm\u003c\/td\u003e\n\u003ctd\u003e30 cm\u003c\/td\u003e\n\u003ctd\u003e32.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Stand with Minifigure Positions","offer_id":56178170495298,"sku":null,"price":37.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-75050-b-wing-display-stand-01-hero-20260915.webp?v=1789475647"},{"product_id":"lego-75242-black-ace-tie-interceptor-display-stand","title":"Acrylic Display Stand for LEGO Black Ace TIE Interceptor (75242)","description":"\u003cp\u003eShow the Black Ace's angular wings and dark bodywork above a black acrylic base. The clear support separates the aircraft from the shelf and the minifigure add-on brings the pilots into the display.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe stand is configured for the 75242 interceptor. Choose a position that leaves the full wing outline visible from the front, with clearance beyond the smaller base footprint.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 75242 Black Ace TIE Interceptor. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eStand with collectable: Width: 37cm x Depth: 21cm x Height: 24.5cm Stand without collectable: Width: 18cm x Depth: 11cm x Height: 14cm\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Stand with Minifigure Positions","offer_id":56178170528066,"sku":null,"price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-75242-black-ace-tie-interceptor-display-stand-01-hero-20260915.webp?v=1789475647"},{"product_id":"lego-75190-first-order-star-destroyer-display-stand","title":"Acrylic Display Stand for LEGO First Order Star Destroyer (75190)","description":"\u003cp\u003eRaise the First Order Star Destroyer so its wedge-shaped hull and layered upper surfaces can be seen together. This open acrylic stand keeps the large spacecraft above the base, with its figures displayed nearby.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe mounted model is wider and deeper than the support platform. Use the complete display measurements to leave room for the long bow and broad rear hull before placing it on a shelf.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 75190 First Order Star Destroyer. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDisplay stand plus product measurements: W: 56.0cm D: 32.5cm H: 22.5cm\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Stand with Minifigure Positions","offer_id":56178170560834,"sku":null,"price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-75190-first-order-star-destroyer-display-stand-01-hero-20260915.webp?v=1789475648"},{"product_id":"lego-75101-first-order-tie-fighter-display-stand","title":"Acrylic Display Stand for LEGO First Order TIE Fighter (75101)","description":"\u003cp\u003ePresent the First Order TIE Fighter in a level hovering position. A clear horizontal support raises the central cockpit between its two tall wings, above a black octagonal base.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe accompanying minifigure area keeps the characters next to the aircraft. This version is designed for set 75101; the wing clearance and support connection should be checked against that exact model.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 75101 First Order TIE Fighter. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDisplay stand plus product dimensions: W: 22cm D: 20cm H: 30.5cm\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Stand with Minifigure Positions","offer_id":56178170593602,"sku":null,"price":37.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-75101-first-order-tie-fighter-display-stand-01-hero-20260915.webp?v=1789475647"},{"product_id":"lego-75209-han-solo-s-landspeeder-display-stand","title":"Acrylic Display Stand for LEGO Han Solo's Landspeeder (75209)","description":"\u003cp\u003eLift Han Solo's blue landspeeder slightly above the display base to suggest its hovering stance. The horizontal clear support keeps the long bonnet and open cockpit visible from the side.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe minifigure add-on lets the characters stand next to the vehicle. Place the display where its narrow body can be viewed along its length, leaving room beyond both ends of the base.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 75209 Han Solo's Landspeeder. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDimensions including LEGO product: W: 20.0cm D: 13.5cm H: 11.0cm\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Stand with Minifigure Positions","offer_id":56178170626370,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-75209-han-solo-s-landspeeder-display-stand-01-hero-20260915.webp?v=1789475649"},{"product_id":"lego-75262-20th-anniversary-imperial-dropship-display-stand","title":"Acrylic Display Stand for LEGO 20th Anniversary Imperial Dropship (75262)","description":"\u003cp\u003eGive the small Imperial Dropship a raised display position with its troop area and wings in view. Clear acrylic supports carry the aircraft above a black base, while the minifigure add-on groups the figures beside it.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThis configuration is for the 20th Anniversary 75262 build. Use the hero and empty-stand images to compare the support layout and figure positions before ordering.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 75262 20th Anniversary Imperial Dropship. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Stand with Minifigure Positions","offer_id":56178170659138,"sku":null,"price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-75262-20th-anniversary-imperial-dropship-display-stand-01-hero-20260915.webp?v=1789475649"},{"product_id":"lego-75211-imperial-tie-fighter-display-stand","title":"Acrylic Display Stand for LEGO Imperial TIE Fighter (75211)","description":"\u003cp\u003eAngle the Imperial TIE Fighter so the cockpit and geometric wing panels read as one display. A clear stem raises the model above a black octagonal base, with a separate area for its minifigures.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe support is matched to the Solo-era 75211 set. Allow space for both large wing panels and compare the mounted-model measurements with the shelf opening, not just the base size.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 75211 Imperial TIE Fighter. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDisplay stand plus product measurements: W: 45.5cm D: 27.0cm H: 30.0cm\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Stand with Minifigure Positions","offer_id":56178170691906,"sku":null,"price":37.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-75211-imperial-tie-fighter-display-stand-01-hero-20260915.webp?v=1789475648"},{"product_id":"lego-75173-luke-s-landspeeder-display-stand","title":"Acrylic Display Stand for LEGO Luke's Landspeeder (75173)","description":"\u003cp\u003eShow Luke's familiar desert speeder above the shelf in a low hovering arrangement. The clear support leaves the exposed engines, rounded nose and seating area visible while the figures stand alongside.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe black octagonal base and angled support are configured around set 75173. Keep the vehicle's full length clear of neighbouring displays so the side-mounted engines remain easy to see.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 75173 Luke's Landspeeder. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDimensions including LEGO product: W: 26.0cm D: 14.5cm H: 9.50cm\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Stand with Minifigure Positions","offer_id":56178170724674,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-75173-luke-s-landspeeder-display-stand-01-hero-20260915.webp?v=1789475843"},{"product_id":"lego-7778-midi-scale-millennium-falcon-display-stand","title":"Acrylic Display Stand for LEGO Midi-scale Millennium Falcon (7778)","description":"\u003cp\u003eGive the compact Midi-scale Millennium Falcon a display position of its own. The angled acrylic support lifts the circular hull and forward mandibles above a small black platform.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThis stand is for the 7778 model. Its scale and support arrangement differ from larger Falcon sets, so match the set number rather than relying on the spacecraft name alone.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 7778 Midi-scale Millennium Falcon. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display Stand","offer_id":56178170757442,"sku":null,"price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-7778-midi-scale-millennium-falcon-display-stand-01-hero-20260915.webp?v=1789475850"},{"product_id":"lego-75210-moloch-s-landspeeder-display-stand","title":"Acrylic Display Stand for LEGO Moloch's Landspeeder (75210)","description":"\u003cp\u003eShow Moloch's broad tan landspeeder in a level hovering stance. A horizontal clear support holds the vehicle over a black base, keeping the nose and rear bodywork visible from the side.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe minifigure add-on provides a neighbouring display area for the characters. Plan the arrangement around the full vehicle width and length, with space to view its low body profile.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 75210 Moloch's Landspeeder. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDimensions including LEGO product: W: 20.0cm D: 14.5cm H: 11.0cm\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Stand with Minifigure Positions","offer_id":56178170790210,"sku":null,"price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-75210-moloch-s-landspeeder-display-stand-01-hero-20260915.webp?v=1789475851"},{"product_id":"lego-75099-rey-s-speeder-display-stand","title":"Acrylic Display Stand for LEGO Rey's Speeder (75099)","description":"\u003cp\u003eRaise Rey's compact desert speeder above a black base so its tall front body and side-mounted equipment stay visible. The clear horizontal support gives the model a hovering presentation.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe minifigure add-on keeps Rey beside the vehicle. Match this stand to set 75099 and use the gallery to check the model attachment and empty support layout.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 75099 Rey's Speeder. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Stand with Minifigure Positions","offer_id":56178170855746,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-75099-rey-s-speeder-display-stand-01-hero-20260915.webp?v=1789475849"},{"product_id":"lego-75204-sandspeeder-display-stand","title":"Acrylic Display Stand for LEGO Sandspeeder (75204)","description":"\u003cp\u003eShow the Sandspeeder's twin forward cannons and sand-coloured wings from a raised angle. A clear stem lifts the craft over its black octagonal base while the pilots remain beside the model.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe mounting arrangement fits the 75204 build. The open presentation keeps the cockpit and wing surfaces accessible, with room needed around the mounted craft beyond the smaller base.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 75204 Sandspeeder. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDisplay stand plus product measurements: W: 18.0cm D: 19.0cm H: 18.0cm\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Stand with Minifigure Positions","offer_id":56178171937090,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-75204-sandspeeder-display-stand-01-hero-20260915.webp?v=1789475849"},{"product_id":"lego-75053-the-ghost-display-stand","title":"Acrylic Display Stand for LEGO The Ghost (75053)","description":"\u003cp\u003eLift the Ghost above a black base to reveal its wide hull, cockpit and contrasting panels. The angled clear support presents the freighter as a complete spacecraft, with its minifigures grouped beside it.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThis stand is configured for the 75053 Ghost. Use the full mounted dimensions when choosing a shelf so the body and wings have clearance around the display.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 75053 The Ghost. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDisplay stand plus product measurements: W: 33.5cm D: 19.0cm H: 29.0cm\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Stand with Minifigure Positions","offer_id":56178171969858,"sku":null,"price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-75053-the-ghost-display-stand-01-hero-20260915.webp?v=1789475850"},{"product_id":"lego-75155-rebel-u-wing-display-stand","title":"Acrylic Display Stand for LEGO Rebel U-Wing Fighter (75155)","description":"\u003cp\u003eGive the Rebel U-Wing an elevated position that shows its elongated body and wing layout. The clear support angles the aircraft above a black base, alongside the included minifigure display area.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eMatch the stand to set 75155 and leave room around the aircraft's full length. Check the wing position shown in the gallery when planning how the completed display will fit your space.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 75155 Rebel U-Wing Fighter. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDisplay stand plus product measurements: W: 46.0cm D: 22.0cm H: 25.0cm\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Stand with Minifigure Positions","offer_id":56178172002626,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-75155-rebel-u-wing-display-stand-01-hero-20260915.webp?v=1789475847"},{"product_id":"lego-75168-yoda-s-jedi-starfighter-display-stand","title":"Acrylic Display Stand for LEGO Yoda's Jedi Starfighter (75168)","description":"\u003cp\u003ePresent Yoda's small green starfighter in a level hovering arrangement. The clear horizontal support raises the cockpit and compact wing panels above a black octagonal base.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe minifigure add-on gives Yoda a position next to the ship. This mounting layout is intended for set 75168, keeping the small craft and its character together in one display.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 75168 Yoda's Jedi Starfighter. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDisplay stand plus product dimensions: W: 17.0cm D: 14.0cm H: 16.0cm\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Stand with Minifigure Positions","offer_id":56178172035394,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-75168-yoda-s-jedi-starfighter-display-stand-01-hero-20260915.webp?v=1789475851"},{"product_id":"lego-10304-chevrolet-camaro-z28-display-stand","title":"Acrylic Display Stand for LEGO Chevrolet Camaro Z28 (10304)","description":"\u003cp\u003ePlace the Camaro on a dedicated acrylic display that keeps its long bonnet and muscular side profile visible. The black base and add-on form a defined platform around the completed car.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe base and matching add-on use 5 mm black acrylic and connect with magnets. Position the car as shown in the gallery and leave enough room around the complete model to view its chosen body configuration.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 10304 Chevrolet Camaro Z28. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eDimensions (external): Width: 34.1cm, depth: 20cm, height: 4.6cm\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display Stand","offer_id":56178172068162,"sku":null,"price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-10304-chevrolet-camaro-z28-display-stand-01-hero-20260915.webp?v=1789475851"},{"product_id":"lego-10269-harley-davidson-fat-boy-display-stand","title":"Acrylic Display Stand for LEGO Harley-Davidson Fat Boy (10269)","description":"\u003cp\u003eGive the Fat Boy a stable display arrangement with its large wheels, engine and low-slung frame visible from the side. Clear acrylic supports position the motorcycle above a black base.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe stand is shaped for the 10269 model and uses 5 mm acrylic for its base and support. Choose a display direction that leaves the engine side visible and provides clearance around the handlebars.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 10269 Harley-Davidson Fat Boy. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMeasurement scope\u003c\/th\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003estand only\u003c\/td\u003e\n\u003ctd\u003e34 cm\u003c\/td\u003e\n\u003ctd\u003e20 cm\u003c\/td\u003e\n\u003ctd\u003e2.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ewith collectible\u003c\/td\u003e\n\u003ctd\u003e34.5 cm\u003c\/td\u003e\n\u003ctd\u003e20 cm\u003c\/td\u003e\n\u003ctd\u003e20 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display Stand","offer_id":56178172100930,"sku":null,"price":51.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-10269-harley-davidson-fat-boy-display-stand-01-hero-20260915.webp?v=1789475850"},{"product_id":"lego-10258-london-bus-display-stand","title":"Acrylic Display Stand for LEGO London Bus (10258)","description":"\u003cp\u003ePresent the red London Bus on an angled acrylic stand that brings the roof and upper-deck details into view. The clear support lifts the vehicle over a black base while preserving its recognisable side profile.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThis stand is configured for set 10258. The empty support is low, but the completed double-decker display needs substantially more height, so check the measurements with the model before placing it.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 10258 London Bus. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMeasurement scope\u003c\/th\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003estand only\u003c\/td\u003e\n\u003ctd\u003e34 cm\u003c\/td\u003e\n\u003ctd\u003e20 cm\u003c\/td\u003e\n\u003ctd\u003e3 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ewith collectible\u003c\/td\u003e\n\u003ctd\u003e34.5 cm\u003c\/td\u003e\n\u003ctd\u003e20 cm\u003c\/td\u003e\n\u003ctd\u003e20 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display Stand","offer_id":56178172133698,"sku":null,"price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-10258-london-bus-display-stand-01-hero-20260915.webp?v=1789475851"},{"product_id":"lego-10242-mini-cooper-display-stand","title":"Acrylic Display Stand for LEGO MINI Cooper (10242)","description":"\u003cp\u003eTurn the MINI Cooper towards the viewer with a clear angled support and black display base. The raised position shows its white roof, green bodywork and small-car proportions together.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe 5 mm acrylic base and support are matched to the 10242 build. Plan the shelf arrangement using the completed display dimensions, leaving room to view the roof and both ends of the car.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 10242 MINI Cooper. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMeasurement scope\u003c\/th\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003estand only\u003c\/td\u003e\n\u003ctd\u003e34 cm\u003c\/td\u003e\n\u003ctd\u003e20 cm\u003c\/td\u003e\n\u003ctd\u003e5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ewith collectible\u003c\/td\u003e\n\u003ctd\u003e34 cm\u003c\/td\u003e\n\u003ctd\u003e20 cm\u003c\/td\u003e\n\u003ctd\u003e15 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display Stand","offer_id":56178172166466,"sku":null,"price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-10242-mini-cooper-display-stand-01-hero-20260915.webp?v=1789475850"},{"product_id":"lego-10252-volkswagen-beetle-display-stand","title":"Acrylic Display Stand for LEGO Volkswagen Beetle (10252)","description":"\u003cp\u003eDisplay the Beetle at an angle that reveals its rounded bonnet, roof and blue bodywork. Clear acrylic supports raise the model from a black platform without enclosing the car.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThis stand is designed around set 10252. Allow clearance above the mounted model and around its accessories, and use the product-only gallery view to check the support arrangement beneath the vehicle.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 10252 Volkswagen Beetle. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMeasurement scope\u003c\/th\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003estand only\u003c\/td\u003e\n\u003ctd\u003e34 cm\u003c\/td\u003e\n\u003ctd\u003e20 cm\u003c\/td\u003e\n\u003ctd\u003e5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ewith collectible\u003c\/td\u003e\n\u003ctd\u003e34 cm\u003c\/td\u003e\n\u003ctd\u003e20 cm\u003c\/td\u003e\n\u003ctd\u003e18 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display Stand","offer_id":56178172199234,"sku":null,"price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-10252-volkswagen-beetle-display-stand-01-hero-20260915.webp?v=1789475850"},{"product_id":"lego-10220-volkswagen-t1-camper-van-display-stand","title":"Acrylic Display Stand for LEGO Volkswagen T1 Camper Van (10220)","description":"\u003cp\u003eShow the T1 Camper Van's two-tone body and raised roofline on a dedicated angled stand. The clear acrylic support separates the camper from its black base and improves the view across the roof.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe base and support use 5 mm acrylic and are configured for set 10220. Leave room around the completed van, especially at the front and rear where the body extends beyond the support area.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 10220 Volkswagen T1 Camper Van. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMeasurement scope\u003c\/th\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003estand only\u003c\/td\u003e\n\u003ctd\u003e34 cm\u003c\/td\u003e\n\u003ctd\u003e20 cm\u003c\/td\u003e\n\u003ctd\u003e5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ewith collectible\u003c\/td\u003e\n\u003ctd\u003e34 cm\u003c\/td\u003e\n\u003ctd\u003e20 cm\u003c\/td\u003e\n\u003ctd\u003e17 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display Stand","offer_id":56178172264770,"sku":null,"price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-10220-volkswagen-t1-camper-van-display-stand-01-hero-20260915.webp?v=1789475850"},{"product_id":"lego-21321-international-space-station-display-stand","title":"Acrylic Display Stand for LEGO International Space Station (21321)","description":"\u003cp\u003eRaise the International Space Station so its long solar arrays and central modules can be viewed together. The clear acrylic support places the model above a compact black display base.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe station's completed span is much wider than the empty stand. Check the mounted dimensions and keep neighbouring objects clear of the arrays when planning a shelf or desktop arrangement.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 21321 International Space Station. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMeasurement scope\u003c\/th\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003estand only\u003c\/td\u003e\n\u003ctd\u003e10.8 cm\u003c\/td\u003e\n\u003ctd\u003e14 cm\u003c\/td\u003e\n\u003ctd\u003e16.9 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ewith collectible\u003c\/td\u003e\n\u003ctd\u003e49.4 cm\u003c\/td\u003e\n\u003ctd\u003e26.6 cm\u003c\/td\u003e\n\u003ctd\u003e32.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display Stand","offer_id":56178172789058,"sku":null,"price":51.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-21321-international-space-station-display-stand-01-hero-20260915.webp?v=1789475850"},{"product_id":"lego-92176-saturn-v-display-stand","title":"Acrylic Display Stand for LEGO NASA Apollo Saturn V (92176)","description":"\u003cp\u003ePresent the Saturn V horizontally on two clear acrylic cradles. The desktop base follows the rocket's long shape, giving its cylindrical stages a flight-style display above the shelf.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThis is the freestanding stand configuration shown in the gallery. The paired clear supports connect to a black base; allow space for the full rocket beyond the smaller stand measurements.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 92176 NASA Apollo Saturn V. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eProduct dimensions (excluding model): Width: 31cm Depth: 19cm Height 14.5cm\u003c\/p\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display Stand","offer_id":56178173149506,"sku":null,"price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-92176-saturn-v-display-stand-01-hero-20260915.webp?v=1789475905"},{"product_id":"lego-10290-pickup-truck-display-stand","title":"Acrylic Display Stand for LEGO Pickup Truck (10290)","description":"\u003cp\u003eGive the red Pickup Truck a display angle that shows its bonnet, cab and open load bed together. Clear acrylic stems position the model above a black base sized for this vehicle.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe support arrangement is matched to set 10290 and uses a 5 mm black base. Arrange the truck so the bed remains visible and leave clearance for any seasonal accessories you choose to display.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 10290 Pickup Truck. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display stand is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMeasurement scope\u003c\/th\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003estand only\u003c\/td\u003e\n\u003ctd\u003e34 cm\u003c\/td\u003e\n\u003ctd\u003e19 cm\u003c\/td\u003e\n\u003ctd\u003e3.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ewith collectible\u003c\/td\u003e\n\u003ctd\u003e34 cm\u003c\/td\u003e\n\u003ctd\u003e19 cm\u003c\/td\u003e\n\u003ctd\u003e15.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003eAssembly is required. Fit the supports to the base before adding the model, then position the display on a level surface with clearance around the build.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display Stand","offer_id":56178173182274,"sku":null,"price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-10290-pickup-truck-display-stand-01-hero-20260915.webp?v=1789475920"},{"product_id":"lego-76917-nissan-skyline-gt-r-r34-display-stand","title":"Acrylic Display Stand for LEGO Nissan Skyline GT-R R34 (76917)","description":"\u003cp\u003eKeep the Skyline and its driver together on a low-profile black acrylic display. Wheel cut-outs locate the car on the base while embedded studs provide a position for the minifigure alongside it.\u003c\/p\u003e\u003ch2\u003eDisplay arrangement\u003c\/h2\u003e\u003cp\u003eThe 5 mm platform is configured for the 76917 Speed Champions model. This version holds the car close to the base, making it suitable for showing the vehicle's side graphics and front profile together.\u003c\/p\u003e\u003ch2\u003eFit and configuration\u003c\/h2\u003e\u003cp\u003eFor LEGO 76917 Nissan Skyline GT-R R34. Check the exact set number before ordering.\u003c\/p\u003e\u003cp\u003eAn open acrylic display base is supplied. An acrylic enclosure is not included.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMeasurement scope\u003c\/th\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003estand only\u003c\/td\u003e\n\u003ctd\u003e19 cm\u003c\/td\u003e\n\u003ctd\u003e13.5 cm\u003c\/td\u003e\n\u003ctd\u003e0.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ewith collectible\u003c\/td\u003e\n\u003ctd\u003e19 cm\u003c\/td\u003e\n\u003ctd\u003e13.5 cm\u003c\/td\u003e\n\u003ctd\u003e5.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eAssembly and use\u003c\/h2\u003e\u003cp\u003ePlace the base on a level surface, locate the wheels in their cut-outs and attach the minifigure to its studded position.\u003c\/p\u003e\u003cp\u003eLEGO models and minifigures are not included. A separate information plaque is not included.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"https:\/\/www.cubebuff.com\/collections\/lego-display-stands\"\u003eLEGO display stands\u003c\/a\u003e. See our \u003ca href=\"https:\/\/www.cubebuff.com\/pages\/shipping-and-delivery\"\u003eShipping \u0026amp; Delivery policy\u003c\/a\u003e and \u003ca href=\"https:\/\/www.cubebuff.com\/policies\/refund-policy\"\u003eRefund Policy\u003c\/a\u003e for current order terms.\u003c\/p\u003e","brand":"CubeBuff","offers":[{"title":"Display Base","offer_id":56178173215042,"sku":null,"price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2833\/7730\/files\/cb45-lego-76917-nissan-skyline-gt-r-r34-display-stand-01-hero-20260915.webp?v=1789475919"}],"url":"https:\/\/www.cubebuff.com\/collections\/lego-display-stands.oembed","provider":"CubeBuff","version":"1.0","type":"link"}