Angled Acrylic Display Case for LEGO® McLaren Formula 1 Race Car (42141)
Angled Acrylic Display Case for LEGO® McLaren Formula 1 Race Car (42141)
Give your LEGO® Technic McLaren Formula 1 Race Car (42141) a dedicated display with this angled acrylic dust cover and racing-themed printed backdrop. The enclosure is designed around the long, low Formula 1 profile while keeping the front wing, cockpit, wheels and rear section clearly visible.
Add your name or custom text before placing your order.
Description
Give your LEGO® Technic McLaren Formula 1 Race Car (42141) a dedicated display with this angled acrylic dust cover and racing-themed printed backdrop. The enclosure is designed around the long, low Formula 1 profile while keeping the front wing, cockpit, wheels and rear section clearly visible.
This display product is designed specifically for LEGO® Technic McLaren Formula 1 Race Car set 42141. Display case only; the LEGO® car set is not included. CubeBuff is an independent brand and is not affiliated with or endorsed by the LEGO Group.
Choose a display format for 42141
- This listing: the Angled acrylic enclosure shown in the gallery.
- Open presentation: the separate McLaren 42141 display base, which has no enclosure.
- Wall presentation: the separate McLaren 42141 wall-frame configuration.
These are separate display products with their own structures and space requirements. The open base is not an enclosure or a wall mount.
Dimensions & Specifications
Display Case Type
Fully enclosed freestanding acrylic dust-protection display case, supplied as individual components for assembly.
Case Sizing
The enclosure is designed around the official dimensions of LEGO® set 42141, with approximately 3–5 cm of additional viewing clearance where applicable.
Internal Display Space
The internal compartment provides clearance around the model to help keep the front wing, wheels, rear wing and bodywork away from the acrylic panels.
Materials
- 3 mm reinforced high-clarity cast acrylic enclosure panels.
- 10 mm thick solid display base.
- McLaren racing-themed printed backdrop shown in this listing’s gallery.
Structure & Finish
- Precision slot-and-tab assembly structure.
- No permanent adhesive required for the main enclosure.
- Precision-polished acrylic edges.
- Stable freestanding structure for shelf, cabinet and tabletop display.
Installation & Structure Guide
1. Remove the Protective Film
Remove the protective film from both sides of all acrylic panels before assembly. Check that each panel is clean and transparent before continuing.
2. Assemble the Side Panels
Align the front, rear, left and right acrylic panels with the corresponding slots in the base. Insert each panel carefully and make sure all locating points are correctly seated.
3. Position the Model
Place the completed LEGO® McLaren Formula 1 Race Car in the center of the display base and adjust it to the intended viewing position.
4. Install the Top Panel
Align the top panel with the upper locating points of the side panels and lower it evenly into position until the enclosure is securely seated.
Assembly Notes
- The product is supplied as a parts kit and requires assembly.
- The main acrylic components use a precision slot-and-tab fitting system.
- No permanent adhesive is required for the standard enclosure structure.
- Assemble the case on a clean, flat and stable surface.
- Do not force acrylic panels into position. Recheck the alignment of the tabs and slots first.
Important Notes Before You Buy
- Designed specifically for LEGO® Technic McLaren Formula 1 Race Car set 42141.
- Please confirm the exact set number before ordering.
- Review this listing’s gallery for the displayed McLaren-themed backdrop. This page lists one configuration rather than separate background options.
- LEGO® set 42141 and the completed car model are not included.
For help choosing the location and format, read our F1 wall-display and acrylic-case comparison.
Trademark Notice
LEGO® is a trademark of the LEGO Group, which does not sponsor, authorize or endorse this independently made display product.
Specifications & what's included
- Display format
- Acrylic Display Case
- Compatible LEGO® set
- 42141
Shipping & returns
Normally 1–3 business days to prepare standard orders. Special or oversized orders may require 5–7 days; custom products may require 5–15 business days. Transit time is additional.
Display product only. Models and LEGO® sets are not included.
Shipping detailsDelivery after dispatch
Standard shipping: an estimated 7–14 business days. Expedited shipping: an estimated 3–7 business days when offered at checkout. Production time is additional; delivery dates are not guaranteed.
Returns and refunds
Request a return within 30 days of delivery at info@cubebuff.com. Eligible requests receive authorization within 48 hours. Wait for approval and the correct return address before shipping anything back.
Custom-made, engraved or personalized goods and items marked Final Sale are excluded from change-of-mind returns. Customers pay non-defective return shipping; shipping costs are non-refundable unless the item is defective.
Request cancellation within 24 hours of ordering. Personal-reason cancellations before shipment carry a handling fee of 10% of the order amount; custom-product exclusions apply.
Approved original-payment refunds take 3–5 business days; international orders may take an additional 2–3 days. Store credit is issued immediately with a 5% bonus. EU consumers have a 14-calendar-day withdrawal window for unused eligible goods.